r32 diff in s13

[Andy4106]

i have one of these

and i want it to go in this.

i have solid bushings, but the diff did not come with bushings.

but there is a little bit of side to side play when i put them in the mount on the diff.

how do i make this work? is the side play ok? or should i get stock bushings? i heard i also need longer studs or bolts to get this diff to bolt in correctly.

[Andy4106]

whoops, also to add i have 5bolt axles with it too.

[OutToWinPAHC]

Ebay bushings.... throw them away and file a paypal complaint. I had a set of those too, they only fit the J30/Q45 case, not the Z32,R, or others listed..... I bought them too. you need a S13 diff cover and Z32 Diff bushings. Energy suspension sells nice hard poly ones. I use them in my S14 case in the S13.

[chaosli]

or get a s14 subframe

[OutToWinPAHC]

Which cost a lot more in the long run
http://www.splparts.com/instructions/SPL_SSB_S13C.pdf

[Andy4106]

do i also need longer studs or am i ok on that front?

[OutToWinPAHC]

They should be 15mm longer, you can get them from a J30/Q45 at the junkyard

[Andy4106]

ill look next time i head there. i tried to find bushings as well, but all that would come up are solid ones. do you have a link by any chance?

[OutToWinPAHC]

http://www.z1motorsports.com/product_in ... ts_id=1581

[Andy4106]

ordered.
awesome! thank you so much for all your help. ill be sure to update this thread as i finish getting the parts and putting the diff in!