Quick SAFC II Sensor Type Question

[ThatOneGuy]

I recently had a problem with my car and for a while I thought it was something with my SAFC II. It turned out to be my CAS and I have since replaced it but I'm a little confused by something. I have a blacktop S13 SR20DET with the E5 ECU and I had the SAFC sensor type as the hot-wire sensor with 5 in and 5 out (it's the stock MAFS). However, when I was checking to see if the SAFC was all right I checked the online manual from APEXi and it listed the sensor type as HW-6 which I'm pretty sure means to set it as hot-wire with 6 in and 6 out. I'm not sure where I got that it was supposed to be 5 in and 5 out but something I read somewhere told me to set it like that. My question is, which is it supposed to be? 5 in and 5 out or 6 in and 6 out? Again, I have the stock MAFS. Thanks.

[SpeedRacer1]

S13 SR's = 6 in and outS14 SR's = 5 in and out

You may have just got them confused in the past.