quick question

[yodawill2000]

I'm gonna do the seafoam thang' here in a bit and have a question.Obviously if you use the brake booster vac line your only treating one side of the engine.In front of both throttle body's there is a approx 1" outside diameter hose clamped to the intake. What is that attached to on the engine ??Can that be used to feed in some seafoam ??
Modified by yodawill2000 at 1:34 PM 5/26/2008

[coolyun_98]

I would suggest use the PCV hoses located on both side of the engine. It should be the spot where the intake is dirtiest.

[yodawill2000]

Are they to the rear of the engine ?

[coolyun_98]

They are to the middle of the engine

[yodawill2000]

Thanks Coolyun !!My bud Little Willie sent me a great diagram of the hoses and valves.Gonna smoke up the hood this weekend

He also mentioned the hoses will probably crack as they are the originals so I plan on replacing the hoses and valves while I'm at it.