quick question regarding downpipe.

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
demolition
Posts: 29
Joined: Wed Aug 29, 2007 7:23 am

Post

Hey guys was just wondering if was possible to drop in SR w trans attached with a 3 inch downpipe attacthed as well all the same time into a S13 ? or do i have to take off the downpipe and bolt it in when its in the car?

thanks.

Rodrigo.


duffman1278
Posts: 6816
Joined: Sun Apr 01, 2007 3:09 pm
Car: 89 240sx Hatch, the wildcats!

Post

Just install it after

User avatar
CMG
Posts: 1259
Joined: Tue Jan 16, 2007 6:48 pm
Car: 1989 240sx Hatch w/ Redtop

Post

You can put in the shifter, transmission and engine in one, piece, then put on the elbow and downpipe after.

ajolliff
Posts: 40
Joined: Mon Jan 14, 2008 2:37 pm

Post

I think it would have been easier if I waited to put the shifter on.. So just to get the engine in quicker, with out breaking anything, I would recommened to install the down pipe after you have the motor in.

codyace
Posts: 1195
Joined: Tue Apr 26, 2005 7:22 am
Car: S14 w/redtop
Contact:

Post

Def keep the downpipe out of the way. It's uber easy to install, so no worry about impossible bolts once the engine in.


Return to “SR20DET Forum (rear-drive)”