quick question about running a larger maf

[sxslut]

Hey, so I've had my redtop with a gt28 running with the stock ka24e maf for a few months now and would like to free up some of the restriction by installing the Q45 maf I have lying around. I know that a safc (which I also have lying around) is required to do this, but I am really not ready to mess with the fuel correction settings yet. So basically I was wondering if it would be ok to wire everything up and set everything to 0 with the exception of the maf in and out settings... Would this work.. If not, how should this be done?

[480sx]

All you have to do is wire it up and change the In/Out settings.

However, your really not going to notice the tiny hp gain you will get. I would just save that other maf until you go to turn up the boost, otherwise its kinda a waist.

Since you have the Q maf lying around tho, its w/e.

[sxslut]

Yeah i know its not going to make much of a difference but i have already turned up the boost to 11psi and just thought it would be good if the motor could breath a little easier. anyway, I just wanted to make sure it was safe if i decide to do it