Quick Bose Stero Question... HELP PLEASE

[NolaPathy504]

Hello everyone, great site. TONS of invaluable information on this site, can't get enough

I just have one quick question...

I'm just about finished installing a new head unit in my pathy and after reading about it on this site i went with the PAC ROEM NIS2 wiring harness. If I am keeping the stock Bose speakers then do I want to use the high level input or the low level input for the bose speakers.

Any help is greatly appreciated... THANKS!

[Azndjay]

just match the wires from the cd player to the PAC ROEM NIS2 wire color and you should be fine. I was confused also when i first install it ,but went with the same color as if you were just install a plain harness .

[NolaPathy504]

I did, but for the PAC harness it has a high level input and a low level input for the rear and front left and right speakers positive wires. Either the high or low level wires need to be used and I am wondering which set (high or low) that I should use if I am still using Bose speakers with an aftermarket head unit and subwoofer in the system

[Azndjay]

i have the bose system also. Take the highs and twist the wires run to the car turn it on and try it out and if it works go with that and vice verse. just dont turn the volume on high . I wish the Pac company would make it easyer to under stand with there manual