quick 240sx part compatibilty question!!

ONLY for ADVANCED technical discussion about the 240sx!
ESPER
Posts: 525
Joined: Fri Aug 16, 2002 3:14 pm

Post

ok, i have a 1995 s14 SE.my car has NO ABS and NO VLSD.

Theres another car, a 1993 240sx SE hatchback with 98000 KM, this car has LSD, and ABS, along with the 4 wheel steering

could i take the VLSD out of it and directly bolt it in mine??

and finally, what should i look for to make sure that the VLSD is ok??

thanks to all who reply


User avatar
Movingviolation240
Posts: 1681
Joined: Thu Apr 25, 2002 2:26 pm
Car: '95 Nissan 240SX 400hp SR20DET -SOLD
'93 Lexus SC300 w/ SP66 turbo kit

Post

it will bolt in with a little work, mainly the bushings are different, as is the rear cover. If your halfway intelegent it shouldn't be a problem at all. Just swap the rear cover over from the S14 and stick it in. I put an S14 LSD into my S13 and had to come up with a new way to mount the front botls since S13's dont' have the bushings, but if you save the hardware it should all go fine. (I'm doing a crap job of explaining it but when you see it you'll understand).

PaulOrlando, FL


Return to “240SX Technical Forum”