Questions for the smart guys

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
GorillaClub
Posts: 107
Joined: Tue Dec 02, 2003 10:54 am
Car: Racing...

Post

Well here is my question, I have an SR20DET with full exhaust no cat, front mount, and a boost controller, the boost is set to about 10 punds with me spiking at 14.... but my question is that I get flames out of the exhaust at times (which usually mean a rich mixture) but I also here a popping sound occasionally (which mean lean) so I am left confused can anyone shed some light on this for me.


User avatar
virus77
Posts: 1775
Joined: Thu Mar 25, 2004 9:43 am
Car: 95 S14, 71 240z, 97 e320

Post

poping sound is backfiring because its rich, same thing as the flame scenario but with no flame. Im guessing this happens when you shift?

Nismo_Freak
Posts: 10314
Joined: Wed Jul 24, 2002 10:42 pm
Car: 89 Nissan 240SX

Post

It's normal if it's during shifting, or when you let off the throttle.

It's not normal if it happens under acceleration, and that would typically be a misfiring situation due to a timing retardation (knock) or a sudden fuel spike (similar to rotaries when 2ndaries kick in).

User avatar
srpowered240sx
Posts: 12661
Joined: Wed Jun 29, 2005 1:17 pm
Car: 90 240sx-sr, 92 F-150, 00 bmw 323ci, 1991 s13 coupe, 99 F250 Dsl

Post

check the gap on the plugs. when do the flames show up? wide open throttle, between gears, on on decel??


Return to “SR20DET Forum (rear-drive)”