QUESTION on my r33 gtst "wheel studs"

[bracket4life]

Well i am going to be just drag racing this car from now on and was wondering what extended wheel studs will fit in the rear, and in the front.

Thanks for any help or guidence.

[Vandrel]

any extended ones will fit, so long as you have the correct sizes. they are standard nissan sizes, if you are unsure check the specs for the 300z

[tyndago]

Nismo has them. Try one of the places that stock Nismo studs.

[MagikDragon]

http://www.splparts.comgo to z32-exterior-wheel accessories and get the ARP 13mm knurl they are cheap and most possibly the best in the industry.

[EL MAMITO USMC]

we need to find one for my friends car, which stud can we get that would fit a ecr33 rb25det rwd. thanks guys

[EL MAMITO USMC]

hey guys im still need one, any help would be apreciated

[MagikDragon]

http://www.splparts.comgo to z32-exterior-wheel accessories and get the ARP 13mm knurl they are cheap and most possibly the best in the industry.

Email them, they know what's what man. I'm pretty sure a nissan wheel stud come in 1 of 2 sizes 13 or 14mm knurl.

[edthemanjp]

hey guys im still need one, any help would be apreciated

Sean already answered this "Nismo has them. Try one of the places that stock Nismo studs." Go to your local Nissan Dealer they sell Nismo parts, well every Nissan dealer I've been too sells Nismo

[EL MAMITO USMC]

Sean already answered this "Nismo has them. Try one of the places that stock Nismo studs." Go to your local Nissan Dealer they sell Nismo parts, well every Nissan dealer I've been too sells Nismo

yes but all the nismo parts that they sell here are for usdm . any web site that for sure i can find one, thanks

[edthemanjp]

yes but all the nismo parts that they sell here are for usdm . any web site that for sure i can find one, thanks

Dude are you serious, the parts freaking crossover (I got my wheel studs for my R from the local Nissan/Nismo dealer)

Go to the dealer, they probably have a Nismo catalog in Japanese there, you don't need to be able to read Japanese to figure the part numbers for the car you need them for. Once you have the part number they see if its in stock and if not a few days from another local dealer.

Your Nissan parts department has a lot of stuff for your car if you search and befreind them.

[EL MAMITO USMC]

Dude are you serious, the parts freaking crossover (I got my wheel studs for my R from the local Nissan/Nismo dealer)

Go to the dealer, they probably have a Nismo catalog in Japanese there, you don't need to be able to read Japanese to figure the part numbers for the car you need them for. Once you have the part number they see if its in stock and if not a few days from another local dealer.

Your Nissan parts department has a lot of stuff for your car if you search and befreind them.

hey bro relax, ok what i did i got the broken one out and took it there and compared. thank any ways

[jdm_master_X]

IIRC, ARP camaro studs work. Not sure what year, but apparently they work. Approximately 80mm in length (which is more than enough), but you have to switch to lug nuts that accomodate the camaro studs.