Question about Work rims.

[Slidin' Sideways]

I did a search on different offsets and noticed a thread with the Work Equips and Meisters in 17x8 +30, 17x9 +35. I was looking into getting the VSXX's in the same offsets and was wondering if they fit the same. Would they clear Z32 brakes and Stance GR+ coilovers on my S13 with or without spacers?

[adrianfromthecastle]

1st off, lemme just say that offset is almost always irrelavant to brake clearance. Its all in the spoke design, its different clearances with different wheels.

but the 17x8 +30 sounds like it would hit, and if it doesnt, it'll be close. Usually work's 3 piece wheels offer 2 faces, if you have that choice, chose the face that offers the bigger brake clearance (well obviously). And honestly, I'd recommend going with a smaller offser, preferably +10 with that 17x8.

my wheel recommendation size if you want an 8/9 stagger:17x8+1017x9+15just my 2 cents

[Slidin' Sideways]

This that a real noticable offset, could you maybe get a pic? I want a nice offset, but not real big. Maybe enough to not have to roll my fenders or roll them just barely.

[nismofly]

what is "just barely" roll...theres only about 1/2" of space to close up

and for the sizes he said youll only need a roll, no pull and a tad bit more camber

[yokota180sx]

i barely rolled my car....nad i have a 10 -30 hehe

its all in teh camber