Question About Wiring RB20 into 240sx
-
TwoaForteeEssex
- Posts: 8
- Joined: Thu Apr 10, 2008 8:39 am
- Car: 1993 Nissan 240sx
Question About Wiring RB20 into 240sx
so my question is .... so in the KA harness it comes from the ECU through the firewall and splits up from there..... there are like 50 something wires all wrapped up. and on the RB harness its been cut right there... but there are only 30 something wires... i dont understand. and the FAQs on here dont really tell me what those wires are. can anyone shed some light on my situation.
-
TwoaForteeEssex
- Posts: 8
- Joined: Thu Apr 10, 2008 8:39 am
- Car: 1993 Nissan 240sx
Re: (Carl H)
k done. now if i would connect the harness to the ECU i have like 5 plugs on the inside of the car... where do those go?
Re: (TwoaForteeEssex)
no shame eh.
The RB harness doesn't just plug into the S13 chassis, you have to splice wires and lengthen some other wires... That's what the wiring guides were written for... The plugs inside the car interface with the dash and cluster, the wires you need, their colors and their functions are explained in the wiring guides.
The RB harness doesn't just plug into the S13 chassis, you have to splice wires and lengthen some other wires... That's what the wiring guides were written for... The plugs inside the car interface with the dash and cluster, the wires you need, their colors and their functions are explained in the wiring guides.