Question about the size of exhaust piping

Post by **Jookmasta** » Wed Apr 21, 2004 9:29 am

ok so ill be goin turbo this summer and im in the market for an exhaust. this time, the question is not about which exhaust to get, but what size piping to go for. 80mm or 3.15 inch or 65mm (2.56 inch)? or should i go bigger? or in between? any suggestions or comments are welcome. and yes i did search

Post by **Jookmasta** » Wed Apr 21, 2004 9:29 am

o ya, so just to give yall some more of my thoughts, so the apexi dual n1 is the 65mm piping and most of the other exhausts are 80mm (apexi n1, greddy, hks, blitz, brm)

Post by **Jookmasta** » Wed Apr 21, 2004 9:29 am

ok, got the answer. 80mm it is. still post any questions or comments thanks.

Post by **MECPInstaller** » Wed Apr 21, 2004 9:29 am

get a apexi gt spec...

Post by **Jookmasta** » Wed Apr 21, 2004 9:29 am

3.75 piping isnt too big?

Checkered-Member · Post by **Checkered-Member** » Wed Apr 21, 2004 9:29 am

in the world of turbo cars, no exhausts is the ideal setup, or a huge strait pipe running from the turbine to the side of the car, however that is not practical on street use, so, in this case the bigger the better. 3.0" is a good size.you can get away with 2.5" but anything smaller and you are choking the turbine

Post by **vadem** » Wed Apr 21, 2004 9:29 am

Go 3 inch, its actually not that huge. It looks nice especially n1 style kicked out to the left. Hotness. If you want a nice cheap, GOOD quality exhaust. Go with a magan racing, off ebay. Dont let the cheap name fool you. Thats what I have, all the welds are perfect, bends are smooth. Sounds like a damn supra, and is 300 shipped. Its an exact is not a carbon copy of apexi n1.

Post by **andrave** » Wed Apr 21, 2004 9:29 am

The sweetest exhaust new for the money I've seen is the Buddy Club system that is going on zilvia's group buy forum. I can't say I'd want to drive long distances in that, but I am a loud exhaust kind of guy.

Post by **Jookmasta** » Wed Apr 21, 2004 9:29 am

i think my eye is now on the new and improved apexi n1. its now a full stainless steel exhaust and its 449

Post by **StrangeLove** » Wed Apr 21, 2004 9:29 am

http://www.brmusa.com/

Can't get any better than that...

Post by **andrave** » Wed Apr 21, 2004 9:29 am

for 580 bucks? I sure as hell can do better than that...

Post by **Nathan** » Wed Apr 21, 2004 9:29 am

The pricing on their site is REALLY screwed up apparently, Greg has stated the BRM prices in another thread and they are MUCH better.

Question about the size of exhaust piping

Question about the size of exhaust piping

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums