Question about Swap and retention of factory alarm/ign kill.

[ddgsxr504]

I searched but after several attempts my criteria was not pulling anything up.

So I have debated and debated about KA-T or SR and for the money SR is the easiest and the cheapest IMO....

After trolling around and reading Heavy Throttle's guide to swap and what not it mention something about dis-connecting/removing the alarm.

If I swap to an S14 SR can I keep the OEM alarm or does that have to come out? I'm not very electrically savvy.

Oh by the way I have a S14 Zenki SE.... 95 to be exact.

[vutony]

I kept my viper alarm when i did my swap, iono if its different with the stock one

[ddgsxr504]

Well the reason I ask is because the alarm is all inclusive with the keyless entry and when the alarm is armed it disables the ignition unless you can turn if off. If you open any door, hood or trunk with out disarming or having the key to put in the door the car is useless.

[Blown240sx]

That wiring should not be affected since it contianed in the internal in cabin harness. Not the enigne harness.