Question about s15 6speed transmission

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
Deadrodent
Posts: 420
Joined: Wed May 25, 2005 9:00 pm
Car: 1992 240sx hatchback
Contact:

Post

Where would I be able to obtain one of these transmissions and would I have to modify the bellhousing to mate up to my sr20?


User avatar
jdm_master_X
Posts: 3518
Joined: Sat Jul 23, 2005 6:22 pm
Car: 92 Nissan 180SX LHD!...LaWL
Contact:

Post

i got one for you. and it bolts up to the block perfect.

but why would you want an s15 transmission? thats blasphemy!

User avatar
ArcherV20
Posts: 1656
Joined: Sat Sep 20, 2003 10:53 pm
Car: 1995 240SX
Contact:

Post

jdm_master_X wrote:i got one for you. and it bolts up to the block perfect.

but why would you want an s15 transmission? thats blasphemy!
Yay for 6-speed? I heard the transmission wasn't as crappy as everyone thinks it is.

User avatar
jdm_master_X
Posts: 3518
Joined: Sat Jul 23, 2005 6:22 pm
Car: 92 Nissan 180SX LHD!...LaWL
Contact:

Post

im not saying its as crappy as everybody thinks. but the 5 speed is just as great, there isnt a great need for the second overdrive gear.

Deadrodent
Posts: 420
Joined: Wed May 25, 2005 9:00 pm
Car: 1992 240sx hatchback
Contact:

Post

jdm_master_X wrote:im not saying its as crappy as everybody thinks. but the 5 speed is just as great, there isnt a great need for the second overdrive gear.
i have a 4.4 rear end dude...that second overdrive would be nice

is it in good condition and would i have to mess with the driveshaft?


User avatar
jdm_master_X
Posts: 3518
Joined: Sat Jul 23, 2005 6:22 pm
Car: 92 Nissan 180SX LHD!...LaWL
Contact:

Post

just switch to a J30 diff. have the GTR/180SX diff for the track days, and J30 for the daily. you'll be all over the gas mileage bro.

i think you would need the s15 driveshaft. the place that has it should sell it to you. and they might throw in the HLSD if you're lucky.

CoupedUp
Posts: 495
Joined: Mon Feb 26, 2007 3:25 pm
Car: 1993 Coupe
Contact:

Post

Honestly, rather than getting the S15 Driveshaft which in turn requires the S15 HLSD. IIRC. Why dont you go down to your local Driceshaft shop and get a custom one piece steel one made for about $300 or under.


Return to “SR20DET Forum (rear-drive)”