question about iacv problem

General discussion forum about the 240sx, and a great place to introduce yourself to the board!
User avatar
Fenvy
Posts: 5052
Joined: Thu Jan 29, 2004 9:30 am
Car: 2005 350Z Base 6MT

Post

yeah so um wha happens if the lines (I think coolant goes through them) are reversed?

Ever since I changed from stock IM to greddy IM, during warming up the car in the moring, the idle will fluctuate between about 55F to 65F.

the idle will just get lower and lower until it drops to about 500rpm, about to stall then jump back to 2krpm.... goes back down, about to stall, jump back up then repeat

This problem occured immediately after I replaced my IM. I checked the gasket between iacv and IM and it's not leaking as far as I can tell, visually.

What should I do to remedy the problem?


User avatar
AmoebAssassin
Posts: 2424
Joined: Wed Nov 17, 2004 7:11 am
Car: 1991 Base fastback 5spd, black

Post

What motor? I dont think coolant goes through them on the stock KA motors, but i could be wrong.

User avatar
Fenvy
Posts: 5052
Joined: Thu Jan 29, 2004 9:30 am
Car: 2005 350Z Base 6MT

Post

sr20det

I could be wrong, but when I took it off of the motor, and on a b18b1... both of them had some coolant or some kind of fluid in there


Return to “240sx General Discussion”