Q45tech is awesome!

[Ozzie]

Not that he has done anything for me specifically, but the guy is basically a walking, talking workshop manual.

I think all Q owners owe him a debt of gratitude.

He is most definitely a highly valued member of this forum.

Qtech, if you read this, I just wanted to say thanks for all your help on the Nico forums, and hope you stick around for a long time.

Thanks buddy!

[TnQDrvr]

Having spent many hours with Dennis at T3, I can honestly say he is a treasure trove of info for the Q45. He willingly shares his knowledge and could not be more gracious or helpful in person.

[maxnix]

Exactly why I always say every board member must read every post by Q45tech to understand the G50 specifically, and automotive preventative maintenance in general.

I remember one new member complained there were too many and he didn't address the FGY33 directly very often. I guess all that knowledge made his head hurt? All I can do is quote one of Q45tech's most sublime statements,

"Member's standards vary."

[superuber]

Alright already! The guy is good! There, Are you happy now.

(I guess I lost my pride for a moment there.)

[infinitinut2]

In 2000, when down at T3's having guides, etc., done on my 92 Q, Dennis came by and, in that I did not have the Mobil 1 ATF for the flush, he took me in his BEAST to a parts store. Definatley not a candidate for Pebble Beach (both Dennis and the Q!), but Boy, did that Q run! WOT most of the way! Later, in the day plus at T3, Dennis told me of a suspension mod that he was going to make to my Q! OK, why not! He then put a flat washer at the bottom of each strut, and the nut back on! He was right...the suspension was more responsive! Yes, we all owe him many thanks!

[elwesso]

interesting about that suspension mod. never heard about that... be interested to see what that actually did.

[lino]

Sometimes Dennis loses me in his elaborate explanations but in the end I get a great response and support that I really appreciate, even if I have to ask Wes later if I didn't understand something .

Thanks Dennis

[Q45denver]

interesting about that suspension mod. never heard about that... be interested to see what that actually did.

I think he uses the washers to tighten up the sway bar bushings.

[maxnix]

I think he uses the washers to tighten up the sway bar bushings.

Yes, he has advocated this for tuning the reposonse of the rear sway bar links by preloading them.

[greenwar]

Sometimes Dennis loses me in his elaborate explanations but in the end I get a great response and support that I really appreciate, even if I have to ask Wes later if I didn't understand something .

Thanks Dennis

Same happens to me. I find myself searching google, wikipedia to understand what he is talking about.

Regardless, many thanks to you(Q45Tech) for sharing your knowledge. Where else can you get to ask question to a Q45 guru, let alone find one?