Q45 VIP Junction Produce Rear Trunk Wing Any Demand??

Post by **jamesmost** » Fri Oct 28, 2005 5:33 am

G50 roof spoiler here <<<

Post by **ShineAutoProject** » Fri Oct 28, 2005 6:13 am

yes.........the Junction kit will fit the kouki without mods except for the front bumper.

Post by **Q45CALIBER** » Fri Oct 28, 2005 8:46 am

Looks like were at 8 people now for the rear roof spoiler!!!

redmanfx wrote:Thanks for the call. I've checked that one out and it's not really what I'm looking for. That one is just like the one on E-bay. It's a little to boxy for me and the front bumper is not what I like. Now if you do exhaust work we can start another thread about custom headers or something. I know you could sell up to 20 of those to the NICO community.

red

Custom Headers I'm in on that ...PICK IT UP!

Post by **kimrober** » Fri Oct 28, 2005 10:11 am

If Junction kit fits 94-96 models except for the front bumper, then if you can keep the price of the kit without front bumper under $1k, then it would be still cheaper than buying the Junction full kit at price of $4400.Price for genuine front bumper ~ $1k + replica parts (7pcs) ~$1k = Junction full kit for $2k.

Post by **ShineAutoProject** » Fri Oct 28, 2005 10:58 am

Hey Kim................... Even though the zenki kti fits for the side and rear..........also keep in mind that the trimming is a big different.........i was told by a member of this forum that the trimming is different............but not much of a difference.

I got an update on price for the Impul fog lights..........$600 not including shipping.........ouch!

Post by **ShineAutoProject** » Fri Oct 28, 2005 10:59 am

big=bit*

Post by **ShineAutoProject** » Fri Oct 28, 2005 1:35 pm

Ok guys.... what kit is the most demanded among g50 enthusiasts???

Post by **Jeff Williams** » Sat Oct 29, 2005 6:48 am

I vote for IMPUL, like in my previous post. BUT you have to get rid of the stupid front plate mount. People who have to put on a front plate can use the factory piece.

Post by **ShineAutoProject** » Sat Oct 29, 2005 8:58 am

Ok guys......it looks liek we're going to have to buy a 94+ impul front which is going to run about $1500..... keep in mind guys that the fog lights are $600. We need at least 12 customers for the Impul kit..........who's in?

Post by **kimrober** » Sat Oct 29, 2005 9:39 am

Oh my God.... $600 for fog lamps? That's pretty nuts man...Actually I liked Junction produce kit much better but it seems that it don't matter because there isn't any kit available for 94-96 in US. There seems to be quite a few 90-93 kits out there (like JPUSA or Xenon kits), so it looks more reasonable to bring in 94-96 here.I remember that the 90-93 kits are little different in fitment, if you're going to sell them as 94-96 kit, it seems better to modify the molding/kit before you advertise them to sell because people normally don't want to go to body shops to fix them to fit unless they're so desperate. Just my .02

Post by **kimrober** » Sat Oct 29, 2005 9:56 am

Jeff Williams wrote:I vote for IMPUL, like in my previous post. BUT you have to get rid of the stupid front plate mount. People who have to put on a front plate can use the factory piece.

Haha... you're lucky Jeff that you guys don't have to worry about citations for not having license plate in the front. I have a few friends who "refuse" to put plates on for pure styling purpose and they pay $50 fine every so often.

Post by **Jeff Williams** » Sun Oct 30, 2005 3:58 am

I have a Corvette guy in Texas put stickers on his front bumper of the tag number. Not sure if it makes the Police happy, though.

Is it $1,500 for the whole 94-96 kit, or just for the front spoiler?

How are you reproducing the kits, Are you buying a kit, then copying it? Can you modify the mold, to use our US fog lights? What is your capacity to custom-fab?

So many questions.

Post by **ShineAutoProject** » Sun Oct 30, 2005 3:03 pm

$1500 is just for the front bumper WITHOUT the fog lights. Yes, we plan on buying kits and repoducing it. The impul fog lights and the us fog lights are totally different. Modifying the front bumper would totally change the look, which is something we dont want.

So far........ it looks like people are intersted in:

Roof spoilers.....

Impul kit for 94+

and 3 piece rear wings?? am i correct?

Post by **ShineAutoProject** » Sun Oct 30, 2005 3:05 pm

I can't believe you guys aren't interested in Junction Produce kits...........I know it's boxy and all.......but that's JDM VIP !!!!!!!!!!!!!!!

Post by **redmanfx** » Sun Oct 30, 2005 3:22 pm

I sent you back an e-mail. I'm pumped now. Impul works for my 92 Q!!!

red

Post by **kimrober** » Sun Oct 30, 2005 4:08 pm

Yes, it seems Impul kit for 94-96 is the one most people in here want including myself. Impul kits are popular here because it gives the aero dynamic look without drastically changing the body line of the car. I think 350zQ45a had Brabham Edition Q with impul/stillen kit on it, it looked very nice.

Post by **kimrober** » Sun Oct 30, 2005 4:22 pm

ShineAutoProject wrote:I can't believe you guys aren't interested in Junction Produce kits...........I know it's boxy and all.......but that's JDM VIP !!!!!!!!!!!!!!!

Junction Produce kits are one hell of pimp-a$$ kits

Post by **GreenQ45a** » Sun Oct 30, 2005 8:33 pm

ShineAutoProject wrote:$1500 is just for the front bumper WITHOUT the fog lights. Yes, we plan on buying kits and repoducing it. The impul fog lights and the us fog lights are totally different. Modifying the front bumper would totally change the look, which is something we dont want.

So far........ it looks like people are intersted in:

Roof spoilers.....

Impul kit for 94+

and 3 piece rear wings?? am i correct?

"You sir are correct" (R) by wes...

I like both kits leaning more towards Impul.

1500 just for the front bumper? How much for the other 7 pcs of the kit?

Post by **ShineAutoProject** » Sun Oct 30, 2005 9:04 pm

Hey Green, I don't know if you've read the previous posts, but when I mentioned $1500....I was referring to purchasing the original Impul front bumper from Japan.......not a price to sell. The full Impul kit retails for $5500!!!!!!!!!!!!!!!!!!!!!

Post by **Q45CALIBER** » Mon Oct 31, 2005 9:07 am

Ok so where are we with the roof spoilers. I beleive we had 10 people intrested. What is the pricing aside from the body kit?????

. I don't like that original spoiler you presented ShineAuto it just does not seem as appealing as the three piece joint.

......The Junction body kit looks very sexy on that Black Q....whew! From that angle it does not appear to be so boxy.....

Post by **GreenQ45a** » Mon Oct 31, 2005 9:30 am

ShineAutoProject wrote:Hey Green, I don't know if you've read the previous posts, but when I mentioned $1500....I was referring to purchasing the original Impul front bumper from Japan.......not a price to sell. The full Impul kit retails for $5500!!!!!!!!!!!!!!!!!!!!!

I want to know how much for your kit after the mods to make it match the US G50\Q45.

I know Impul charges 1499.99 for there front bumper...I hope your not trying to charge that for your bumper alone...

I thought you were thinking 1500.00 for all 8 of your pcs.

Post by **GreenQ45a** » Mon Oct 31, 2005 9:31 am

Can you get the windguard that go around the windows?

Post by **rasrx7** » Mon Oct 31, 2005 9:46 am

this guy has quality parts that are well worth the dollar value. of all the kits i have ever seen...if i didnt see it for myself..his kits are made of high quality materials..so far to me the best in the industry..almost like urethane kits out there..its 100% better then japan produced kits and for what he sells his kits for....he should charge just as much..but he dosent.....take advantage that hes local and he supplies only quality parts...if you're looking to go vip and you have a luxury car..then you should have the big bucks to buy the parts in japan for 5000 or more...he provides it to you at a quater of the cost..are u sure you want to drive a vip car or a honda????

Post by **QE86** » Mon Oct 31, 2005 9:54 am

ShineAutoProject wrote:We currently don't have the impul for the 94.... the only difference is the front bumper. The style of the front bumper looks pretty much the same, although the application is different. If someone would loan us a 94+ q45 for us to check out.......we might be able to make something happen... THAT is if there is enough demand for this.... we want at least 12 buyers.........

AS for the fog lights........ you will have to get them ordered from Impul.....there's no way we can make the fog lights and be profitable. I will check with our staff in Japan for the best pricing for impul fog lights.........

I have a 94Q and I am close enough for test fitting/sponsoring

I am in for the roof spoiler also!!

Post by **elwesso** » Mon Oct 31, 2005 9:56 am

rasrx7 wrote:this guy has quality parts that are well worth the dollar value. of all the kits i have ever seen...if i didnt see it for myself..his kits are made of high quality materials..so far to me the best in the industry..almost like urethane kits out there..its 100% better then japan produced kits and for what he sells his kits for....he should charge just as much..but he dosent.....take advantage that hes local and he supplies only quality parts...if you're looking to go vip and you have a luxury car..then you should have the big bucks to buy the parts in japan for 5000 or more...he provides it to you at a quater of the cost..are u sure you want to drive a vip car or a honda????

no offense but that Q looks very ashamed to wear all that garbage...

IMO the Y33 looks much better with a kit.. the hg50 just doesnt work.

Post by **rasrx7** » Mon Oct 31, 2005 10:59 am

no offense..but thats hot? please ban me...please...i dont know if i can post here ne more...

Post by **elwesso** » Mon Oct 31, 2005 1:27 pm

really i like everything on your car except for the stick on 94 grille and the front bumper...

BTW I tend to think that my Q is about the best looking one out there minus the paint.....

Post by **rasrx7** » Mon Oct 31, 2005 1:47 pm

minus the wheels too....are those stock 350z wheels?????wow....and if you're using the im building a sleeper excuse.....sleeper or cheaper..some how they seem to chime in the same......u might as well toss on some steel blackies with no hubcaps...there are lighter and will definitely play on the sleeper theme...no offense...just alittle playful bantering...besides..this isnt vipstylecars.com right..were not in this forum for vip cars only....just for regular q45 stock q/a stuff.....

elwesso wrote:
no offense but that Q looks very ashamed to wear all that garbage...

IMO the Y33 looks much better with a kit.. the hg50 just doesnt work.

it should be more ashamed to be putting nissan 350z STOCK wheels on it...its a q.....not a z....the person you bought the used stock set from tossed em out in favor for others cause they were "garbage" looking to him......so then you d be putting garbage on a q...what disrespect and you're a moderator..."say it aint so joe....say it aint so"...i think you need to ban me and erase this comment now after you read it.. hehehehe...

as for the grill its a mod from japan...that i found for the 91s....take is as a mod that no one will probly ever have and im the only one who does..making it extremely rare over here...heheheheheh..and well just leave it at that...im spent..
Modified by rasrx7 at 4:16 PM 10/31/2005

Post by **elwesso** » Mon Oct 31, 2005 1:58 pm

yep for the track model

Post by **Jeff Williams** » Mon Oct 31, 2005 2:25 pm

elwesso wrote:yep for the track model

It's the trak Q!

Wes, Lower that Q!

Q45 VIP Junction Produce Rear Trunk Wing Any Demand??

Re: (sixxdeuce)

Re: (ShineAutoProject)

Re: (ShineAutoProject)

Re: (Jeff Williams)

Re: (kimrober)

Re: (ShineAutoProject)

Re: (ShineAutoProject)

Re: (ShineAutoProject)

Re: (ShineAutoProject)

Re: (ShineAutoProject)

Re: (ShineAutoProject)

Re: (rasrx7)

Re: (elwesso)

Re: (rasrx7)

Re: (elwesso)

Re: (rasrx7)

Re: (elwesso)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums