Q45 Maf's with Power FC at SR20DET

Post by **erothem** » Mon Feb 03, 2003 10:58 am

I am about to receive an Infinity Q45 Mafto replace the stock maf at 1995 S14 SR20DET

I am also about to install the power fc ecu but can notuntill i know how to configer the power fc to workwith the Q45 maf.

1. Does anybody know how to wire the Q45 maf to the SR20DET? is it the same way like the z32 maf ?

2. Does any body know how to configer the FC commander to accept the Q45 maf ?

Post by **Ace** » Mon Feb 03, 2003 10:58 am

Don't think that we are hating on you. Most of the people on this site have S13 SR20DET's, and I don't know of anyone with an Apex Power FC. Try here http://forums.freshalloy.com/u...s.php

Post by **erothem** » Mon Feb 03, 2003 10:58 am

Thanks for letting me know

Post by **themadscientist** » Mon Feb 03, 2003 10:58 am

do you have a manifold to mount the throttlebody?

Post by **erothem** » Mon Feb 03, 2003 10:58 am

Post by **themadscientist** » Mon Feb 03, 2003 10:58 am

how do you propse to mount that huge thing without a manifold. it's like 80mm! The stock one is what, 50mm? the mounting flange is monstrous.

Post by **erothem** » Mon Feb 03, 2003 10:58 am

This is a mass air flow meter sensor.It has not supposed to bhe connected to the manifold.It is connected between the air filter and the air filter pipe.Am i wrong?Do i need a bigger manifold also?

Post by **themadscientist** » Mon Feb 03, 2003 10:58 am

no you are right, I just need new glasses, thought you were talking about the throttlebody.:dunce There should be a choice in the commander for the Q45 AFM.

Post by **James** » Mon Feb 03, 2003 10:58 am

Uhm, any luck with that wiring?The p/n is 22680 6IU00 A36-000 P60 yes?-James

Q45 Maf's with Power FC at SR20DET

Q45 Maf's with Power FC at SR20DET

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums