q45 interchangeable parts with?
q45 interchangeable parts with?
I've been reading a lot on what I can run on the Q45 from other nissan cars ie: brakes, suspension, and what not. But was wondering if I can run a cross member from the 300zx and if it was interchangeable with the q
-
YELLOW S13
- Posts: 64
- Joined: Fri Sep 16, 2005 3:29 pm
- Car: 2009 Pontiac G8 GT
2003 Chevy Tahoe (Old ladys)
2005 Nissan Altima 2.5 (Old ladys)
2006 Nissan Quest SE
1993 Nissan 240sx Coupe (Sold) :(
1994 Infiniti Q45 (Sold) :(
1993 Infiniti G20 (Dead...finally) - Location: Phoenix,AZ
Re: q45 interchangeable parts with?
Anything is possible with custom work but straight bolt in... I doubt it V6 vs V8 ..I assume different motor mounts etc.
-
maxnix
- Posts: 22627
- Joined: Mon Jul 22, 2002 8:11 pm
- Car: 1995 Infiniti Q45
1995 Infiniti Q45t
2000 Infiniti Q45
Re: q45 interchangeable parts with?
While similar, the Z32 was dimensioned smaller than the G50.PoppinLC wrote:I've been reading a lot on what I can run on the Q45 from other nissan cars ie: brakes, suspension, and what not. But was wondering if I can run a cross member from the 300zx and if it was interchangeable with the q
-
DeatschWerks
- Posts: 180
- Joined: Wed Jul 27, 2005 9:11 am
- Location: Oklahoma City, OK
- Contact:
Re: q45 interchangeable parts with?
Injectors from a Z32TT and SR20DET should be interchangeable with the VH41 and VH45.
Just have to watch the years on the Z-cars, 90-94 are Phase-I and 95-96 are Phase-II and I believe all of the SR20DET injectors are Phase-II.
Just have to watch the years on the Z-cars, 90-94 are Phase-I and 95-96 are Phase-II and I believe all of the SR20DET injectors are Phase-II.
Re: q45 interchangeable parts with?
Just be sure you pressure test any injector swaps to be sure the o rings make a leak tight seal to the rail before installing.