Putting Kouki side skirts on a 95 240sx

[foreigndog]

I bought some kouki skirts off of Ebay and was wondering for those who have put kouki skirts on their 95-96 240sx. How many holes have to be made in the rocker panel? I see the 7 screws that attach to the underside, but what about the clips? I have to also get them painted white, any suggestions on that? Sand down? Thanks for the help!

[MAXIMUS Nismo]

hrrm. I dont know. But I would sand them then take them to maaco. They do a decent paintjob if you do the prepwork first. the 7 screws you see + at least 1 in each clip. post pics of what you got. Maybe we can help you more.

[Arqi]

I was wondering the samething, plus where do the end caps mount to? I have a 96 240sx, I will try to post some pics.
Modified by Arqi at 8:06 PM 9/1/2005

[240DRFT]

the ends u usually have to use little screws to put it in and ive seen people use double sided tape along it too

[97ka-t]

If you really want I'll go out and measure my holes on my Kouki, it's skirtless, but had SE skirts a month ago..

[Arqi]

That would be great! Would you be able to take some pics also? Thanks

[97ka-t]

I'll try to get all that for you some time today

[98s14inaz]

Use stainless self-tapping screws. Put the skirts on with double sided tape. Put the front screw in. The rear cap screws into this small braket the size of a quater that slips onto the edge of the metal, it clamps down as you tighten. Then go underneath and put stainless self-tapping screws in. Your done. This is how I put my skirts from my wrecked 98 on my 95, good luck.

[Arqi]

Here are some pics of my skirts. What size screw did you use and did you screw the little arms of the skirt to the body of the car?

[98s14inaz]

Here are some pics of my skirts. What size screw did you use and did you screw the little arms of the skirt to the body of the car?

Just use whatever fits the hole. As far as length, 1/2" to 3/4" nothing longer. for the holes on the sides, remove those platic pins, and use 3m automotive grade double sided tape all the way down with the self tapping screws on the bottom holes.

[Arqi]

Thanks for the fast reply and the info. I will post some before and after pics.

[NickWendt03]

i want to do the exact same thing

[KDashy]

Dammit where are you guys getting these kouki sideskirts.

[97ka-t]

Wish you woulda talked to me earlier! I sold my mint cond. black Kouki skirts... Navan will be replacing them, eventually

[KDashy]

Wish you woulda talked to me earlier! I sold my mint cond. black Kouki skirts... Navan will be replacing them, eventually

Damn.

[Arqi]

Dammit where are you guys getting these kouki sideskirts.

I got my skirts on ebay for about $250 shipped.

[Riley2.4L]

hey be sure to post of pic of your ride after you put the kouki skirts on