Putting back a KA

Post by **Rusted_PS13** » Wed Nov 02, 2005 1:03 pm

How hard would it be? I found a motor for $50.00 but the downside is the pistons has been taking out, all i really need is the head but i was thinking about just rebuilding this motor while everything is taken apart.

-Mikey

Post by **Nismochick240** » Wed Nov 02, 2005 1:31 pm

rebuilding a ka isn't hard... i did mine stock and it cost me around 1k to rebuild it back to stock... if ur looking for power in the long run i recommend that you go ahead a replace parts needed for ur future setup-- ie-- ka-t going w/ lower compression pistions..

Post by **dickie** » Wed Nov 02, 2005 1:56 pm

i just got done having my ka rebuilt, except i swapped to an s14 head that was ported/polished/blah blah blah... anyways race prepared. i bought a complete running (as far as i know) s14 ka for the valve cover, timing cover, and aux timing gear. you can have it if you need it.

Post by **Nismochick240** » Wed Nov 02, 2005 2:00 pm

lol ur sig is funny

Post by **dickie** » Wed Nov 02, 2005 2:10 pm

thanks, i pirate threads for fun or to draw attention to myself. i also have these pictures of me in the firefighter suit for when i flame people, but i havent gotten a chance to use it since nobody wants to talk about free rb26dett and awd drivetrain swaps anymore

^ see there i go pirating again.

Post by **Rusted_PS13** » Wed Nov 02, 2005 5:05 pm

lol, i just noticed the peg legged, you should put a eye patch

Post by **dickie** » Thu Nov 03, 2005 8:26 am

what are you talking about? theres an eyepatch right there!

Post by **Rusted_PS13** » Thu Nov 03, 2005 12:58 pm

ahh, that's awesome!!!

Post by **dickie** » Thu Nov 03, 2005 1:27 pm

and if you need a head let me know. i have that s14 engine but its still all together and i wont part it out (yet) because i dont have the time or storage space. i got mad parts left over from my car and half of them are for s14.

Post by **Rusted_PS13** » Fri Nov 11, 2005 1:59 pm

hey d!ck i think i may need a set of cams, do you have a set?

Thanks,Mikey

Post by **dickie** » Fri Nov 11, 2005 2:22 pm

no more stock cams laying around , only the webb racing cams. im still a long ways from swapping those in and getting rid of the stock ones i have though, so theyre still out there.

Post by **Rusted_PS13** » Fri Nov 11, 2005 2:35 pm

hey man you got AIM? I think i might need help with the final teardown of my motor. EGR tube is being a PITA

Post by **dickie** » Fri Nov 11, 2005 2:41 pm

lol you wont want to aim me on this one. i have played with my car before, and im still figuring crap out for myself. just because i took mine apart really doesnt mean im any more knowledgable than you. you might get ahold of djpants, he does crap like that on a daily basis.

now i regret getting rid of my other engine, i could have had a great project going :P

Post by **Rusted_PS13** » Fri Nov 11, 2005 2:47 pm

sp you don't have any cam gears? any knowledge if two intake cams would work? and most importantly....What the hell happened to the kitty?!?!?

Post by **dickie** » Fri Nov 11, 2005 3:27 pm

kitty was replaced because i found this gem at the top of the sr forums. (yeah i know im a traitor).

its the most hilarious thing i have seen since i signed up. btw the title of his post was "S14"

i DO have 2 sets of cam gears you can have, im pretty sure 2 intake cams would not work unless you could find a way to turn one to where it would function as an exhaust cam. not sure if its possible. never tried it.

but if you want my gears and upper chain its yours. there are some people that are asking about it but no ones picked it up or asked me to ship yet.

Post by **Rusted_PS13** » Fri Nov 11, 2005 3:52 pm

cam gears as in the sprokets or the whole thing? i'll take it, factory? year? how much?

Thanks, Mikey

Post by **dickie** » Fri Nov 11, 2005 4:12 pm

i have the ones that came off my 93 motor that have little to no wear and some aftermarkets that have never been used. the chain was on my engine but it never ran w/ that one on; i got another chain w/ my kit.

i swear i have the whole things in the boxes in the garage, lemme look for you before i say for sure. you need the bolts too?

Post by **Rusted_PS13** » Fri Nov 11, 2005 4:16 pm

the bolts that hold the sprockets in? not really, but yeah. How much are you selling your aftermarket cams?

Post by **Rusted_PS13** » Fri Nov 11, 2005 5:15 pm

Hit me up on AIM if you can d!ck, it's Ishyoboimikey. Need more info on the cams bro

Post by **Rusted_PS13** » Fri Nov 11, 2005 6:14 pm

your still around d!ck? I really need the OEM cams...

Thanks,Mikey

Post by **dickie** » Tue Nov 15, 2005 8:55 am

hey man sorry i havent been around, my best friend passed away thursday and i have been dealing with everything over the weekend. the aftermarket cams im selling (actually giving away ) for $200.

if you need the oem cams, i would have to get them out of my engine right now, as that is the only set i have. and i wont be able to do that for a long while. all the other stuff is just kind of chilling in a box right now.

Putting back a KA

Putting back a KA

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums