Projectrb240sx Project

[PROJECTRB240SX]

WELL I'VE DECIDED I'M SELLING ALL MY RBS AND I'M INSTATING A NEW PROJECT THAT WILL BE UNFOLDING OVER THE NEXT FEW MONTHS (WAITING ON TAX RETURN). THIS IS GOING TO BE PRODUCING OVER 400HP AND 400FT/LBS OF TORQUE. ITS A BASE PRICE OF $2500 AND ITS GOING BE AROUND $3800 TOTAL.

[PROJECTRB240SX]

ITS STILL A NISSAN RB..... BUT I'M GOING 3L! I WAS WEIGHING MY OPTIONS AND COSTS AND IT LOOKS AS IF THE 30 IS MY CHEAPEST ROUTE.

[BoostFab]

having too many ideas isn't a good think, focus on one prospect and you will get there sooner. lol

so, what are you selling? I might be interested.

[Nathan]

Seriously, I think you have changed direction with this project more than I have...that's not a good thing Why dont you just try to get the car up and running with one of the several engines you allready have, then go from there?

[PROJECTRB240SX]

The car is running.... having a powersteering nightmare.I'm doing this because I was going to buy pistons and rods today for my rb20det when I got a email saying that this company would build me a bolt in rb30det that will drop right into my rb20 swapped car for $2500 + shipping, I would need to provide ecu, loom(rb20det), exhaust manifold, injectors, coils, transmission, and turbo.

Lets just say Gaskets, rods, pistons, bearings, rings, pins, studs, bolts, and machining would cost $3500 and this motor with already double power would cost less, so you decide which route to take?

[PROJECTRB240SX]

Once I recieve this engine I will be selling one rb20det parted block(its already torn down), one rb20det longblock minus exhaust side, loom, coils, and others.

[93RPS13]

RB30 with what head? thanks

[PROJECTRB240SX]

rb25de non vvt. it plugs into the rb20det loom according to this company and utilizes top-feed injectors.

[Phat_Optimo]

Is this your final idea??? Don't answer that....Sounds good, but I was wondering what kind of eng mgt are you going to run? Kick *** plan... I hope it comes through for you.

[93RPS13]

you should try get a lightwieght crankshaft made some you can have higher revs... just an idea

[PROJECTRB240SX]

YES THIS IS MY FINAL PLAN..... JUST WAITING ON MY RETURN.I'M GOING WITH A MICROTECH LTX-12 BUILT FOR THE RB20DET WIRE HARNESS.

[NISMO_RB25]

What company? I know I had talked to Louis at DDX about the RB30 before, but it was little more than my goals required.

[PROJECTRB240SX]

THEY ARE BASED OUT OF AUSTRAILIA. ITS CALLED NISSAN SPARES.

[PROJECTRB240SX]

WELL I'LL BE SELLING MY RB20DET PART MOTOR SOON. THERE IS NOTHING WRONG WITH IT I WAS JUST GOING TO REBUILD IT SO IT IS ALL TORN DOWN. I WANT $600(OBO) FOR THIS MOTOR, BECAUSE ITS A TURBO MOTOR. I HAVE EVERYTHING THAT CAME OUT OF IT AND THE HEAD IS STILL ASSEMBLED.

I CAN GET ALL THE PARTS FOR THE REBUILD FOR RATHER CHEAPHERE IS GENERAL PRICING:WATER PUMP $117.49OIL PUMP (PERFORMANCE) $347.36GASKET AND SEAL SET $301.60ROD BEARINGS $41.71MAIN BEARINGS $50.09PISTONS (INCLUDES RINGS) $658.32

NONE OF THESE INCLUDE SHIPPING.