Project M37xS - Takeda Intakes - BC Coils - H&R Spacers

[RED_DET]

Just finished up another client project, 2013 Infiniti M37xS... vehicle has been equipped with the following:

M37, G37, G35 aFe Takeda Short Ram Intakes - slight modification required to passenger side mounting bracket for M37-
BC Racing BR Type coilovers
H&R 20mm DRS wheel spacers
Stillen Exhaust

Anyone interested in the the coilovers, spacers or intakes give me a shout.....

[shortys408]

No sound clip?

[RED_DET]

I'm sure we can make arrangement to get one...

[NycGMONyc]

Will that short ram work for a 2009 M35x?
What gains hp/tq?

[RED_DET]

It appears they may fit, but there is no guarantee, we haven't tried them on the M35.

10-15 hp gain is going to be all you get out of any intake in reality.

[stm37s]

set up looks very nice, some of the same mods I have planned for my M37S

[White-Rush]

What is the going price on those intakes and the DRS spacers (15 mm).?

Nice looking setup.

[RED_DET]

PM sent.

[knucklesson]

Can you get a set of BC coilovers for a M56S?

[RED_DET]

Suspension should be the same as the m37.... if so, then not a problem.

[AZhitman]

Beautiful! Nice work, Mike.

[RED_DET]

Thanks boss man!!

[spydaman617]

if this can fit on a 09 m35x intakes please let me know i will be asap

[calidoso]

^^^ same.... been looking everywhere.

[RED_DET]

The only option we have is to try and see what happens. If one of you are willing to buy one and try it I will give you a good deal. These intakes also fit the 2007-2008 G35 sedan which is the same engine as the M35.

Based off the engine bay pics I compared, these should fit the same which requires slight modification to the bracket on the pass intake tube that mounts to block.

Pic of M35 bay:



Pic of M37 bay:



Pic of Takeda intakes installed on M37

[RED_DET]

Just FYI....

M37 and M56 Brake, Exhaust, Intakes and Suspension components added to the site. Any questions or concerns, you can call, email or PM me..

[Altered]

Just an FYI for anyone considering the Takeda's, I installed a set in my M37x and had no issues with the passenger side fitting, so no worries. RED_DET I do appreciate you warning about the install though, I was prepared just in case.

[calidoso]

Has anyone tried it on an M35x yet?

[wideopn11]

@RED_DET, am I reading this correctly that there is now an AWD specific coilovers for M37?

[RED_DET]

Yes sir... special order, could take up to 2wks to receive them.

[White-Rush]

Just FYI....

M37 and M56 Brake, Exhaust, Intakes and Suspension components added to the site. Any questions or concerns, you can call, email or PM me..

Sir, just curious. Is there anyway that you could lay out one of the stillen exhaust systems, and another (random) exhuast that is made for the G37 sedan, just to see how close they would be in fitment?

The Stillen system is not bad, but with nothing else on the market, we may be passing over some of the G37 systems that would possibly work with "minimal" alterations. We know that all systems are made somewhat different, but It would be interesting to see how well something else lines up for our cars.

Many thanks in advance.

[R1Butchie]

Would those intakes fit on the M56 as well?

[RED_DET]

M56 has a completely different intake configuration.

[shortys408]

did anyone with an M37 and the intakes get a sound clip up? any comments on how it sounds?

[stm37s]

well, if all goes according to my plan, I will be purchasing the stillen exhaust from your store in around a week & a half to two weeks, how long would it take to get to Snellville Ga?, was looking at the suspension section and saw eibachs posted but when I clicked on it nothing showed up, just BC coilovers, maybe I hit a wrong button or so, do you sell springs as well? thanks

[RED_DET]

The Eibach's are available, just need to get them added to the website. They are for RWD only...

[GeneralTsou]

Hi all, new to the forum. I read somewhere that the BC coilover kit for the M37x is pieced together from other Infiniti cars. Is this true? I plan on lowering my "soon-to-own" M37x and I'm deciding between BC coils and just springs. I plan to get the sport 20"s.

[RED_DET]

The only other car that shares the M37 rear suspension is the new Q50 and which was made first? The front suspension on the M37 is similar to the G35/G37. To my knowledge there are no companies making lowering springs for the M37x.

We have added the M37 (RWD) Eibach springs to our site for the

[GeneralTsou]

So does that mean the BC coilover kit for the M37x is basically M37 rears and G35/G37 fronts?

[RED_DET]

Probably... The Q50 kit is suppose to be from the M37.