problems bleeding clutch up

[Pugboy]

okay ive stuck a new clutch in, new slave cylander new master cylander, and ive still got no clutch pressure

also underneath the car theres a box with a u shaped pipe on one end then one end going into the transmission and the other going up towards the bonnet anyone know what this does?

[180fan]

that's the damper loop. it'll make the pedal softer and the clutch bleeding a bigger headache. Get your hands on a new stainless line that will eliminate the damper loop from somewhere like spl parts and then bleed the system from the clutch slave cylinder.

[Pugboy]

so its not needed ?

[preludervtec]

No the damper loop is not needed. Here is a writeup for the entire process.

http://www.zeroyon.com/index/content/view/32/47/

I just did this mod and made bleeding my clutch 100x easier. Plus clutch pedal feel has greatly improved. I recommend this mod. Also, i got my SS clutch line from a group buy over on zilva.net $22 shipped.

[Pugboy]

cool cheers mate, also if you know anyone whos HICAS linesare screwed tell them to give me a shout i got a mate to make me some after getting qouted $500 from nissan for the 2.

so if anyone wants any at any point give me a shout and ill get them some knocked up at cost

[Pugboy]

okay ive done the clutch and bypassed it but the clutch now has a slight bit of slip, and the pedal feels like theres nothing there. any ideas

[shayrgob]

that's how my pedal felt at first. U get used to it.

[240on430]

were you guys worried about breaking the lines? if i don't like the feel w/o the damper...would it be easier to break the lines?

i'm looking to do this removal this weekend.