problem wif fog wiring

[VietGQ]

so today i attempted to wire my fogs with my low beam on my silvia front, i did one side which worked, then attempted the other side, i used this article http://www.nicoclub.com/articles.php?id=222886 to help me, so one side worked, and the other side didnt, do i need to replace the headlight relay? when i snipped the green and black wire and tried to wire it with the fog it didnt work and then i tried to reconencted it without fog, and it didnt work so whats wrong any help please fusebox on driver side = relay?

[OutToWinPAHC]

Gay electrons, they went around blowing the fuses.

[240_dude]

Im pretty sure the headlight fuse blew for the low beam because i had the same problem. I wired mine to the fuse box so when my headlights or low beams turn on so do the fogs. Run one of the power lines to the right headlight fuse and the other to the left one. But make sure you upgrade the fuse to a greater number if not the fuse will keep on frying.

[VietGQ]

Im pretty sure the headlight fuse blew for the low beam because i had the same problem. I wired mine to the fuse box so when my headlights or low beams turn on so do the fogs. Run one of the power lines to the right headlight fuse and the other to the left one. But make sure you upgrade the fuse to a greater number if not the fuse will keep on frying.

did both of ur headlights stop working or was it just 1 when u fried the fuse

[VietGQ]

so i need to replace the headlight relay in the fuse?

[240_dude]

No both of the because i was running a small number fuse. Run the wires to the fuse box. One of the foglight power wires to one of the headlights fuse and the other power foglight wire to the other headlight fuse. But upgrade both of them to a 20 so the fuses wont fry. Nothing happens to your relay when u burn a fuse.