Pro Racer GN+ Sizing for an S14 SE

ONLY for ADVANCED technical discussion about the 240sx!
trahsub
Posts: 30
Joined: Tue May 25, 2004 3:16 am

Post

On their site they recommend an 8.5" ET33 up front and a 9.5" ET38 in the rear on the 18" wheel.

Question is, a 9.5" wheel in the rear wont rub??? That seems huge to me.

Next questiong is 35 or 40 series rubber on those rims?


barrigas14
Posts: 326
Joined: Thu Dec 11, 2003 7:53 am

Post

does ET stand for offset? if it does you need to much much lower.

like +20 or less

PGBrian
Posts: 603
Joined: Wed Aug 11, 2004 8:54 am
Contact:

Post

here is the deal.i've said it over and over.

you need to factor in a lot of things before you can conclude that a wheel/tire will rub.

1. wheel size.2. wheel width.3. wheel offset.4. (for front wheel) caster.5. camber6. ride height.7. tire size.

what would fit for person A, might not fit for person B.

i can tell you that i runF: 17x9 +9 215/45/17R: 17x9 +10 225/45/17my front tires run sometimes.rear's don't rub.


Return to “240SX Technical Forum”