power window question

[jdm501]

well yes first off I did search, I've been trying to find this information for two months. I'm wanting to make my base model s13 to all power, windows, locks, and mirrors. i have a parts car with all the parts want just want to know what i have to do. all the posts i found either don't make sence to me or the refer to pictures that don't work. i would greatly appreciate some one who has done this to tell me how to do it and maybe show some pictures if they can. thank you all for the help.

[jdm501]

anyone please i would like to try to swap them this weekend.
Modified by jdm501 at 12:46 AM 5/13/2009

[jdm501]

bumb for a new day anyone here that will help?

[numbnuts240]

i've never done it, but i think it's just a mtter of transporting the harnesses and power equipment over. in any event, good luck.

[DrifterXRPS13]

i'm with tito on this one...shouldn't be too hard...just swap and get to it...good luck

[jdm501]

ya i'm going to give it a try this weekend. i might make a write up about it sense there don't seem to be one.

[jdm501]

ok so i founf that the door parts just bolt in now i just need to know about the wiring. are there plus already in the none power car or do i have to put in all the wiring? any information here would be very helpful. thanks everyone who is trying to help

[blacksrjdm]

^ That post doesnt make any sense.

Your gonna need all the wiring from the power car, along with both regulators, motors, switches, door panels, mirrors, AND ALL COMPONENTS HAVING TO DO WITH THE POWER ACCESORIES. This is really quite easy to do, just tedious. Go to the junkyard and when pulling the harness, make sure that you look to see where it plugs and so forth and duplicate it in your car. All the help anyone needs to do this has been given, feel free to do it.

[sr20power]

yup just man up and get to it. & then let us know how hard it was.