Power Steering Screech

The Nissan 300ZX (Z32) general community discussion forum
User avatar
Fox213506
Posts: 198
Joined: Fri Nov 03, 2006 11:23 am
Car: 1990 Nissan 300zx N/A 1995 Motor Swap

Post

I have a problem, Everytime i take a turn the power steering lets out a loud screech. What causes this to happen when i changed the belt this started to happen.


User avatar
Zwicked
Posts: 3133
Joined: Mon May 14, 2007 6:19 am
Car: 1990 300 ZX tt, 1990 240SX

Post

I would guess your belt is too loose. The belts on this engine need to be tighter than most imagine before they stop squealing.

User avatar
Fox213506
Posts: 198
Joined: Fri Nov 03, 2006 11:23 am
Car: 1990 Nissan 300zx N/A 1995 Motor Swap

Post

Thats not good i broke the tension bolt a long time ago. The rest of the bolt is still in there. Where do i go from here? Buy a new pump?

User avatar
Eikon
Posts: 6928
Joined: Sat Apr 24, 2004 3:20 am
Car: 71 240z, 93 Supra TT
Location: Lake Orion, MI
Contact:

Post

Just to be safe.. check the power steering fluid level as well.. if you are low on fluid the pump will

User avatar
Fox213506
Posts: 198
Joined: Fri Nov 03, 2006 11:23 am
Car: 1990 Nissan 300zx N/A 1995 Motor Swap

Post

The level is pretty good. Maybe i will take the belt off for a while intill i get the new pump. Or can i just buy a new tension bolt, getting the old bolt out will be a alot of work

User avatar
Zwicked
Posts: 3133
Joined: Mon May 14, 2007 6:19 am
Car: 1990 300 ZX tt, 1990 240SX

Post

You should be able to get a new bolt from Nissan. If you take the belt off, it will be tough to steer. You are right, it will be a lot of work, but it's one of those things that just has to get done.

User avatar
freakonaleash1187
Posts: 1460
Joined: Tue Jan 27, 2004 5:09 pm
Car: '93 300ZX N/A, '97 200SX SE

Post

Wait, your broke the tensioner bolt? And then expected the belt to not be loose? I hope I'm reading this wrong.........

User avatar
Fox213506
Posts: 198
Joined: Fri Nov 03, 2006 11:23 am
Car: 1990 Nissan 300zx N/A 1995 Motor Swap

Post

I know that seems stupid but i thought that i had it on there enough when it broke. The bolt had only a couple more twists to go and it would have been ready. I really don't see how it broke but io guess i figured it was on tight enough, but recently it started to make the screech noise.

92 300zx Tx
Posts: 94
Joined: Mon Jul 02, 2007 10:52 am
Car: 92' 300zx N/A

Post

Dont mean to jack the thread but since we are talking about power steering...is it difficult to change out the power steering pressure hose?


Return to “300ZX (Z32) General”