Power Steering Pressure Hose Replacement Infinity I35

[Fergujs]

How hard is this to do myself? I seem to be leaking Power steering fluid, and this hose seems to be the culprit because when i pull the insulation back fluid leaks out. Any instrustion or help as to how to complete this would be appreciated. I found the hose online for cheaper http://www.partsgeek.com/catalog/2003/i ... _hose.html

Please Help!

[the converted]

Here's the same part, but a factory Nissan one. http://www.courtesyparts.com/49720-hose ... _2061_2069& Should just be unbolt at the rack and at the pump, snake the new one in, and replace bolts with new washers. Access behind the engine is a little difficult, but shouldn't be any issues other than figuring out how to get at bolts.

[Fergujs]

Thanks Converted, ya the only reason i was wary is because i didnt know how to get at the connection behind the engine. I guess from below would be the best option?

[NutriaforBreakfast]

http://www.nicoclub.com/FSM/i35/2003/st.pdf
No procedure here but parts shown
I think Chiltons might be better-they seem to have a better procedure for my 95