Power Steering line help! Please. =)

[Ka24DET-S14]

Hello mates, i want to run a power steering like and by-pass the long-leaky oem hose on my S14 240sx. I know most people usually use an M16x1.5 and plug it at the end of the banjo fitting but thats too close to my turbo manifold. Im wondering If i can just remove the entire banjo fitting on the pump and use an M18x1.5 to 6An instead. The photos below will show you what i mean. Is it ok? thanks!

I removed the entire fitting and a M18x1.5 to 6AN would fit on here, is it ok to run it straight from here?

This is the fittings that i removed:


Thanks guys!

[krash]

hmmm, not to sure about that. Do you think the braided ISIS ps hose will clear it? you're probably better off with that. Here's a picture of it installed on my car :

[Ka24DET-S14]

It might just clear but will be very close. Thanks for the reply!