POLL: which wheels to get

General discussion forum about the 240sx, and a great place to introduce yourself to the board!
AJ1356
Posts: 669
Joined: Tue Feb 17, 2004 7:45 pm

Post

ok guys , here is the delima, which wheels do you think looks better.



AJ1356
Posts: 669
Joined: Tue Feb 17, 2004 7:45 pm

Post

circlar rs

AJ1356
Posts: 669
Joined: Tue Feb 17, 2004 7:45 pm

Post

circlar r

User avatar
rico05
Posts: 6895
Joined: Mon Jun 23, 2003 6:52 am
Car: 1992 RMS13 w/ CA18DET
Contact:

Post

5 spoke wheels bore me, so the Circular RS for me.

User avatar
cyrus240sx
Posts: 587
Joined: Fri Jan 23, 2004 5:44 pm
Car: 95 240sx with five lug swap, rims, suspension, I H E, remote start, too bad its auto

Post

the ames just look like copies of the works rims.... if you like the split 5 spoke design then how about these works.... i think these are hot...


AJ1356
Posts: 669
Joined: Tue Feb 17, 2004 7:45 pm

Post

Actually the AME's don't look anything like the Work's , the quality is the same ( work being a tad bit better) however AME's are lighter. most of them about then wieght of the Meister S1's. the the pic of the work wheel you put, that wheel is heavy. the 3 wheels i put for the poll, they are all light wieght, yet look decent and are very strong.

User avatar
Riceless
Posts: 520
Joined: Wed Dec 22, 2004 8:04 am
Car: 84 300zx turbo

Post

For an S14 I'd say the RS. I think the others would look better on an S13 though.

BomexS13
Posts: 2561
Joined: Fri Dec 19, 2003 8:36 pm
Car: '89 Nissan 240SX
'00 Toyota Celica

Post

RS is very nice...circlar looks like a knock off...

AJ1356
Posts: 669
Joined: Tue Feb 17, 2004 7:45 pm

Post

the more i look at it the more it looks like an enkie. but up close it looks nice, may i need to put them agaist my s14 and see which look good.

574-240sx
Posts: 9432
Joined: Sun Dec 01, 2002 6:27 pm
Car: Nissans, Toyotas, Subaru

Post

I like the works. What pricing are you talking about?

AJ1356
Posts: 669
Joined: Tue Feb 17, 2004 7:45 pm

Post

I like the works too, however they are a bit over done, well i am getting AJ special price so i kinda don't know how much are they exactly. they guy who imports them owed me , since i gave him a complete s14 sr. so i am getting the ame's 18x9 up front and 18x11 rear with tires + some endless brakepads and some other little stuff.( kinda don't remember what i am getting) to answer your question, they are about the same price as works, but not many ppl have them

Sky240PWR
Posts: 1248
Joined: Sun Feb 27, 2005 9:27 pm
Car: 1991 Nissan 240SX

Post

whats up thats what i have 18x9 up front and 18x11 in the rear!!.......I love my rims but not to many people on this forum like them. Here is a a couple pics of them( on a demo car, i haven't put them on yet)they're a 3 piece rim, I paid $3000 for them!!!...but they are worth it!!

Sky240PWR
Posts: 1248
Joined: Sun Feb 27, 2005 9:27 pm
Car: 1991 Nissan 240SX

Post

here's another

look at the lip on them babys

User avatar
brisknfade
Posts: 1705
Joined: Sun Oct 03, 2004 5:23 pm
Car: NB8C FTW

Post

Off-topic but.Wow. I thought that was some sort of freak miata at first by looking at the front. All i can say is yeesh.

Nice wheels though.

Sky240PWR
Posts: 1248
Joined: Sun Feb 27, 2005 9:27 pm
Car: 1991 Nissan 240SX

Post

brisknfade wrote:Off-topic but.Wow. I thought that was some sort of freak miata at first by looking at the front. All i can say is yeesh.

Nice wheels though.
haha thats funny cause i have the body kit too!!.....almost everyone on here hates on it but its cool, I should have the kit on by oct or nov, then i'll post some pics and then people can judge it, mine is going to look alot better then their demo car!

AJ1356
Posts: 669
Joined: Tue Feb 17, 2004 7:45 pm

Post

nice rim dude, that is sooommmmme deeep dish.

User avatar
Oatmealman
Posts: 5720
Joined: Sun Feb 02, 2003 1:22 pm
Car: 2011 ford f150 fx4 5.0 master race
Location: Wisconsin

Post

these wheels would look the sex on your car


drifter_for_life06
Posts: 5301
Joined: Sat Jul 05, 2003 5:18 pm
Car: Daily: '16 WRX
Toys: '92 RPS13 400whp
Exocet
Location: SoYoCo, PA

Post

i voted spec -r

the others look too tredny for me

AJ1356
Posts: 669
Joined: Tue Feb 17, 2004 7:45 pm

Post

that looks like fn01rc?? the new black color. am i right?

User avatar
A Spec Products
Posts: 47
Joined: Tue May 31, 2005 8:32 am
Car: 240sx
Contact:

Post

AJ1356 wrote:that looks like fn01rc?? the new black color. am i right?
yep, those are black / polish FN01RC's

id shameless plug right here but hit me up if you need 5zigen wheels

to stay on topic, meisters no question.

chmercer
Posts: 2810
Joined: Sun Mar 09, 2003 5:04 pm

Post

circular Rs are sweeet. so are meisters. thoes split spoke ones are whackjob.

AJ1356
Posts: 669
Joined: Tue Feb 17, 2004 7:45 pm

Post

mostlikely i'll go with circlar spec R they are pretty light even for 18s they are 2 peice looks pretty clean the bad part kinds looks like einki and is made by einki

AkademikONE
Posts: 1786
Joined: Sat Dec 14, 2002 6:55 pm

Post

Just go with some SSR Formula mesh. 17x9 F and 17x10 R

Zydeco
Posts: 5129
Joined: Tue Sep 17, 2002 4:34 pm
Car: The poster formerly know as -]sTm[-HeavyHips
Location: left coast. USA.
Contact:

Post

what kind of power do you have to turn 11 inch rear wheels?

AJ1356
Posts: 669
Joined: Tue Feb 17, 2004 7:45 pm

Post

i dunno about 120 at the wheels ?? lol, j/k. i am gonna go with 10s inthe rear. i have a stock s15 engine. it shoudl be able to turn 10s easlily . i want to with 17s but i don't get that much of choices , not a big fan of bigole wheel personnally. so i might go with miester s1s since they make 17x10. it is all confusing, that is why o put the poll


Return to “240sx General Discussion”