Plug suggestions

[I_eat_hondas]

Just curious as to what everyone is running for plugs. I have heard that NGK iridium ix are the best, Is this true? Right now I am running bosh 2way platnums and they seem ok. Let me know your feelings.. Also does anyone use MSD ignition products? I installed a MSD SCI and a Blaster SS coil and it packs a punch at about 5400 rpm right through the top of the band. Anyone else have this installed??

[MarkEmark]

How does that ignition set-up pack a punch at 5400 RPM??? Any idea what type of horsepower you got from that ignition setup? I use Bosche Platinum + 4, because the car came stock with platinum plugs...they work fine for me, and they gave me 20 hp..nahh...they gave me nothing, but have worked well. yes, I heard NGK iridium's are the best...

[I_eat_hondas]

how it packs a punch is a better question for the techs at MSD to explain, but you really feel it around 5400. It sits you right back in the seat:) I havent put it on the dyno yet but I definetly got a decent gain, And it seems to be mostly top end which is nice because 240s seem to crap out in the top end

[MarkEmark]

How much did the MSD/blaster coil cost you? How hard was it to install?

[I_eat_hondas]

The ignition was 170 and the coil was around 30 and it was easy to install. Infact I have a walkthrough with pictures that I made up if you are interested

[MarkEmark]

Yes, I am [email protected]

[I_eat_hondas]

Im thinking about the PDM cams as well they seem like a great deal. do you know anyone that has installed them?

[Exar-Kun]

nope, but i'd be willing to rip your car apart anyway. sounds like fun.

I have nology wires and coil, with NGK iridium ix plugs. I love them.-chet

[I_eat_hondas]

what does ripping my car apart have to do with anything?

[I am Technoman]

If you were to get PDM cams. What lift would you get?

[S14Zilvia]

Hey Chet, when did you get the lift kit on that thing?

[Exar-Kun]

LOL. it came with the wheels...

optical illusion, the car only sits, literally, 1/10" higher than normal, just looks like I put in an off-road package.

oh well, until I get my ZEAL b6 or TEIN RA, or Apex-i N-1 coilovers, its gonna look that way -chet

[O0ooAJoo0O]

didnt this start out as a plug question, not cams?

well, anyway...i had the bosch plat +4's in my ka, after i did a head gasget replacement. yeah, they sucked balls. if anyone wants them, $20 obo email me. i paid 32 for them at discount auto, they have about 100 miles on them. theyll work good for an american car, just not a nissan. i got the NGK iridiums, damn, theyre good. changed from a bumpy old nasty idle, to a nice purring beast. yeah you do feel it at arounf 5400. they $6.19 each at discount auto, get them, theyre awesome!

[email protected]

[SSS]

The ignition was 170 and the coil was around 30 and it was easy to install. Infact I have a walkthrough with pictures that I made up if you are interested

I would be interested in this too. [email protected].I find that standard plugs work the best for me, i've looked for NGK iridiums but they don't make them here for the SOHC motor.

[SSS]

I've also found magnercor 8.5mm leads work beautifully with the sohc motor.

[I_eat_hondas]

Im running Talyor spiro-core 8.5mm wires and I think they are great ! and Ill mail that walkthrough out asap

[I_eat_hondas]

If you were to get PDM cams. What lift would you get?

I would get the ones that they offer on there site, Intake 219 duration, .379 lift, Exhaust 221 duration, .384 lift I belive they call them stage 2?? whatever

[bruinbear714]

I just use NGK platinums with NGK blue wires. Excellent plugs and wires.

[I_eat_hondas]

hey bruin, nice job on the headers!!

[bruinbear714]

hey bruin, nice job on the headers!!

Thanks.. it was a PAIN IN THE ARSE to install, but well worth it. My car now purrs.