[B]Please Help! Sr wont start after CAS Timing![/B]

[vboy720]

Ok, so I attempted to do my Crank Angle Sensor Timing, since i had removed it, and needed to do this anyway. I followed the guide from this web page http://www.frsport.com/sr20det....html and im %99.8 that I did the whole thing correctly.

On a side note, the reason why I was messing with this stuff, is because my car recently started misfiring. I pulled my spark plugs, and saw how grey and black they where (fouled?), and determined that was where my problem was happening. I cannot replace the plugs until tomarrow because part #3330 was special ordered.

Before doing the CAS timing, my car started, but just sounded like a wrx. But now after the Cas timing, my car just wont start . Any ideas? Im really starting s*&% in my pants because i don't know what to do and have tried searching all over here, and google. Please, any help would be appreciated.

Car info: 91 fastback w/ redtop sr20det, stock everything, except exhaust
Modified by vboy720 at 5:44 PM 6/28/2007

[vboy720]

Also, is there a way to check and see if i performed the CAS timing correct, or to see if there is spark going to the plugs? Can i stick a screw driver into the coilpack and see if sparks come out when cranking? I know you can do that if you have a distributor, but wanted to know if anyone knew about that.