Please help me, and keep the flaming to a minimal

[tigwebu]

I know post like these are not favored by anyone but the nearest dyno is about 2 hours away so it will take me awhile to get there. My set up is this Tial 38mm 15psi spring, turbo design manifold, maxbore throttle body, UR pulley, Fidazana flywheel, t3 garrett turbo a/r 42, SAFC II, MSD BTM, Blaster 2, 555cc injectors. How much HP will this yield? Also I've got ITBs, can I use the TPS for the ITB? I know with this post, it means flame on so please be gently.
Modified by tigwebu at 1:41 PM 3/6/2007

[tigwebu]

??? About the ITB, since I'm still using the Z32 Maf, I will still be able to tune it with my stock ecu and safc-2 right? I guess the question is can I use the TPS from the ITBS with little to no modifications?

[nissanfanatic]

Are you just boring your ITB's out using maxbore...or what..?? I'm confused. It sounds like you are buying a TB, and then having ITB's downstream..

Usually ITBs are connected using a common rod so you can just connect a TPS to that..

[KATwo40]

I'm betting he's using the GSXR 1000 ITB setup, with the TPS mounted to it.

[Kckouki]

Hey Katwo40sx, can you get on SCF ?

[epokh]

There's a dyno here in Neosho....just FYI.....about 45 minutes from you.Casey's Road and Race

[tigwebu]

Bet, I can go there, u live in Neosho right??

[tigwebu]

Are you just boring your ITB's out using maxbore...or what..?? I'm confused. It sounds like you are buying a TB, and then having ITB's downstream..

Usually ITBs are connected using a common rod so you can just connect a TPS to that..

I've got maxbore TB on now, but I want to switch to ITBS, I've got everything to run the ITBS just wanted to know if I could use the TPS from the ITBS or if I had to go another route.