please help lower harness wiring rb25 s13 w/ standalone

[skyline_bred_az]

Ok I have a huge problem I have 91 240hatch with a v500 wolf now my problem isnt the standalone thats simple its the lower harness from the black relay box. Now with the wolf v500 I have no main engine harness due to a full standalone however I still need to supply the coils with 12v and injectors with 12v now i have looked all over this forum for awnsers but have only seen the two lower harness plugs grey/brown get tapped in to the ecu pins .so heres where my question comes in the grey 7pin plug and the brown 8 pin plug where do they go. I dont have AAC and no mafs I know my coils are supplied power through this harness please help me here are some pics of the motor and swap . well I wanted to post some pics can anyone help with putting pics on the page thanks. please can some one help me with what wires do what on these plugs very important need to finish tonight....!!!!!!!

Modified by skyline_bred_az at 11:02 PM 3/4/2007
Modified by skyline_bred_az at 11:03 PM 3/4/2007