PLEASE HELP!!! 1993 NISSAN 300ZX TWIN TURBO

[93Twins]

So I just bought this 1993 Nissan 300zx Twin Turbo Coupe It has 93000 miles on it all original. No swaps or anything done to the car. It's pretty hard to find parts for these cars from other Twin Turboed 300zx's.

My car 1993 300zx Twin Turbo 2+0 T-Top

Parts Car 1993 300zx 2+2

Will this work as a parts car for the front? I know the back is all different cuz of the two extra seats. But I heard that from the dash forward its all interchangeable. Is that right?

Where else can I buy parts?

The owner of the 2+2 said that he has the whole front which is pretty much all I need.
He also told me that he took out a Twin Turbo motor from the 2+2 and transmission and put it into his normal 300zx.

These are probably all the parts that I need or might need.

- Hood
- Both Fenders
- Windshield (Front)
- Front Bumper cover
- Front Bumper
- Both Headlights
- Radiator Support
- Radiator

Maybe more, pretty much most of the Front I will need.

PICTURES ---> http://imgur.com/a/IVYvG

My Car is Silver ZX 2+0 TT
Parts Car is Red ZX 2+2

[93Twins]

So what kinda parts can I use on my 1993 300zx 2+0 Coupe Twin Turbo?? My 300zx is not a swapped it has the original factory twin turbo motor with 93k miles on whole car.

I got hit in the front and need like all of these parts and maybe some more.

- Hood
- Both Fenders
- Windshield (Front)
- Front Bumper cover
- Front Bumper
- Both Headlights
- Radiator Support
- Radiator

I was wondering if I could like find a 1993 300zx 2+2 non turbo and take off all the front end parts from there that I need. Would they work fine?

I found this 93 2+2 that had a twin turbo engine in it and the owner took that out and is parting the rest of the car. It has everything that I need. Would that work?

Please let me know ASAP thanks.

[nissanfreak12]

From the cowl up, body parts are the same. Windshield back is where things are different. Windshield itself I believe are different, some sites have different numbers and some are the same. But I would just plan on getting a new one, cause taking it out may crack it.

[NolimitZ32]

OP, I have merged your topics, please help us conserve server space and make searching less convoluted by not creating two essentially identical threads.

[itsa300zx]

Radiator and support brackets are not the same

[MrFeesLaw]

Well... One thing to watch for is the fact that the 2 seater model was the only model with a turbo option in the u.s. If he says he has a 2+2 turbo that means someone has already swapped and modified parts on the car. You will have to double check everything you remove to make sure it works. If he has a turbo radiator it may be aftermarket and may not fit the same in a 2 seater. He also may have a different flywheel and clutch setup than what your car has, so you need to make sure all parts will swap over if you plan on using his engine. Fenders, bumper, and such should be the same. Windshield will be different. Dash should be the same. Everything behind the dash is kind of a roll of the dice. Some items will be identical, and some will be completely different. Sorry if this is kind of vague, but there are tons of threads comparing the 2 and 4 seaters. You should be safe with any front end body panels or lights. But engine, trans, drivetrain, and all body or interior pieces behind the firewall will need to be double-checked for fitment.