Please, for the love of God help....

[Shaefer Thomas]

I am one day away from hauling my sr and my 240 shell out to a field and spending the rest of my money on explosives to blow them both to hell.

I am an idiot also.

Ok, I broke off one of the cam cap bolts in the head. Removal shouldnt be a problem, although I know it will be. Where can I buy replacement cam cap bolts from? Thanks.

[I ask good questions]

I love your enthusiasm! Good luck with that though.

[ILikeMy240sx]

I hope you were using a torque wrench. The ones that go in inches*lb because those things get torqued in very small numbers (ft*lb wise)

How many did you break? I have some laying around.

EDIT: I only have one spare. The one I have measures 2.4" from the top of the head to the bottom.

[Shaefer Thomas]

I just broke one, but I think I stretched the other one. They were the outside bolts that go into the front caps right by the cam gears. Yeah of course, I was trying to use a torque wrench, but the settings on it were to high sooooo being the idiot that I am, I thought I could go off the scale a little and the wrench would still work. HAHAHA!!! Yeah so, IT DOESNT WORK! Dont try it.

[Shaefer Thomas]

Yeah the other bolt is stretched pretty bad. I can physically see it. Does anyone know where to get these?? New or used??

[SpeedRacer1]

Figure out the sizes you need and get them from an SER SR20DE. They are the same and should cost about $1 each.

[Shaefer Thomas]

you know a good place to order stuff like that online? And what year... I got a redtop with the fins...

[SpeedRacer1]

Try the sponsor on the side. http://www.nissanparts.org/

They are a Nissan/Infiniti dealership and I have ordered parts from them before.

As for the year, say 1993 if you want to get specific. I could give you the part numbers if you knew exactly which one you needed.

[Shaefer Thomas]

Yeah, like I said before they are the outside bolts on the front camshaft caps, the ones right next to the cam gears. If you could get the #s for me that would rock.... Im gonna check out the link rq...

[ILikeMy240sx]

I have that one.

[Shaefer Thomas]

Im gonna need two though.... One broke off and the other is too stretched to use again. I should come pick that one up from you though.

[ILikeMy240sx]

oh I didnt even realize you are in MI haha.

Dude bring me few challupas and its yours.

[Shaefer Thomas]

lmfao chalupas sound good right now too hahaha. Im having a ***** of a time with this.... I figured changing the head gasket would be easy....

[SpeedRacer1]

This is for the intake side outside front bolt: 13058-2J203

It may be the same number for the exhaust side, if it is not then this would be for the other outside: 13058-53j10

[joshcereal]

i just wanted to throw this out ther to im from michigan to haha we sould really all get tother

srry for post leeching

[Shaefer Thomas]

word dude.... thx for the numbers. Ill have to make a few calls tomorrow. Gonna be a busy day.

[Shaefer Thomas]

I dont know where you got those part numbers but I got the bolts in today and they arent even close......

Does ANYONE have a spare couple of these bolts laying around or know where I can get them?

[S13FASTBACKSR]

I thought ilikemy240sx said he had them? if not email this guy he either has them or knows how to get you some [email protected]

[Shaefer Thomas]

He has one, and I need two. Ill prolly go pick one up from him anyways just to check out his ride and chit. So whos this mattology guy?

[Shaefer Thomas]

Ok, well I measured the whole thing out in hopes of getting better results. I have been to every bolt store in the city with no luck. I also ordered the bolts that speedracer gave me the part #'s for and they arent the right ones.

Can anyone shine some light on this? Also, if we DO end up finding the correct part # or bolt, we should post it in the parts page because theres nothing in there about cam cap bolts, and Im sure someone will break one off in the future. Even if they are all different sizes, once we get on the right track it shouldnt be hard finding the rest of them.

[ILikeMy240sx]

Ok I called Nissanparts and talked to good ole Kenny to get these part numbers for you.

There are three different sizes. He was only able to get the part numbers for the shortest size and the middle size. The longest size which is used for the cam oilers he couldnt get.

Middle Size (the one you pictured): 13058 53J00Shortest: 13058 56E00

The short ones are like 90 something cents a pop and the middle ones are like buck 20 or something.

Hed have to order them as he does not stock them.

For this work, you still owe me a challupa

[Shaefer Thomas]

Haha, what are you doin tonight? Ill come drop off your chalupas and take a look at your ride. Shoot me an email!

[ILikeMy240sx]

Going to Ashleys and going to enjoy really fine beer.

If you want a ride or something come by when the weather gets nicer. As of now, I have no traction until I hit 3rd gear and its not fun driving like that haha. Oh and by then I will be done with my head so you can hear what SRs sound like reving to 9000 RPM haha.

[Morph]

Going to Ashleys and going to enjoy really fine beer.

If you want a ride or something come by when the weather gets nicer. As of now, I have no traction until I hit 3rd gear and its not fun driving like that haha. Oh and by then I will be done with my head so you can hear what SRs sound like reving to 9000 RPM haha.

BASTARDS!!!!! Let me know next time you make it down to Tampa area.