pictures of rb25det swap?

[240SXplan]

I was wondering if any of you guys can help me .

Any of you guys.. took pictures of your rb25det swap..??

Please send to me e-mail.. [email protected]

Intercooler holes?Power sterling?

Tia,

plai

[NISMO_RB25]

check members rides section under my name. I posted quite a few pics.

[JonPowell]

what exactly are you looking for pictures of?

[240SXplan]

I like a picture..

1.under the glove box.. the wires.. connection there.

2.a picture of the sensors and connections on the engine passenger side.3. transmission senors connections.?

an over all picture of the harness.

[JonPowell]

You dont really want pictures as much as you want someone to tell you how to wire it.....

Follow the 8 step wiring guide except use the lower KA harness instead of the lower RB harness, take the wires for the oil sending unit and the knock sensoprs fromt he RB harness and add them and their plugs to the lower KA harness.

That should cover most of your wiring issues, any more get ahold of me at [email protected] or on AIM at jonpowellsRB25

[240SXplan]

ok..

I guess I could read on that wire stuff.. they wrote up..I'll try to make some sense out of it..

I'll write you a e-mail.. later.. I'll have to go and see the harness again,..

tia,

Plai

[NISMO_RB25]

not to try to sway you in either direction, but you could pay someone like mckinney to do the wiring for you. People can argue all day on why it is better to do it yourself and save the 350 bucks, but I will tell you that it saved me tons of time and worked perfectly. All I had to do was hook it back up, plug it in and start the car.

[JonPowell]

There are others that do wiring also.....I know of someone.

[gprodigy85]

Jon Powell does wiring as far as i know...

lol

[JonPowell]

I thought I knew someone.....

HA!

[240SXplan]

Here goes.. I went to McKinney and order one wire harness.. I got it.. and I'm still kind of confused.. Under the dash.. there are 4 wires..

1. 4 blue wires.. a. blue/white, b. blue/red, c. blue/blk, d. blue/yellow...should I connect these to the 4 yellow wires from the Mckinney Harness? a. yellow, b. yellow/purple, c. yellow/red, d.yellow/brwn

two more questions...

1.I'm missing a thorttle senor.. I have one hook up but there were two.. hook ups.. top one or bottm one?

2.There is a blue connection.. it was attach with the two green senors under the intake.. the wires are blue and blk.. don;t know where this go....

I think that is it..

tia,

plai

[JonPowell]

The green sensors are knock sensors, the other is probably the IAC valve on the bottom of the intake runners. I would say the best thing for you to do is go to http://www.McKinneyMotorsports.com, get their phone number, and ask them what you should do. I have no idea how they have their stuff setup.

The guys there are great and always willing to help out.