Picture wanted

General discussion forum about all things Datsun! NOTE: If your thread is specific to a certain model, please make sure you post it in the proper forum.
kenbagby
Posts: 183
Joined: Wed Dec 31, 1969 5:00 pm

Post

I'm sure no one has a picture of all three trucks sitting side by side???? The next best thing, Post a picture of your beloved pickup and I'll see if I can't get 3 good model representations put together for the main board picture. My tired little 320 doesn't tell the story.


Pac. coast Datsun
Posts: 286
Joined: Wed Dec 31, 1969 5:00 pm

Post

Heres a pic of my 65 L 320. Ive had it for a year now, it only has 58,000 miles on it & runs great! So far ive lowered it, painted the rims & primered the body.

kenbagby
Posts: 183
Joined: Wed Dec 31, 1969 5:00 pm

Post

Kool, Thanks P-coast. Now we'll have both versions of the 320. Now all we need is a 520, and maybe the PLG 222.  71-521's truck is beautiful and will make a nice addition. If there are any variations, send them. I'll try to get all of them together for the front page. I may wait on mine because I am hoping to have it painted the week after Christmas.

71-521
Posts: 621
Joined: Wed Dec 31, 1969 5:00 pm

Post

allright...here it is...I will get a better pic up soon.

 

havenlamar
Posts: 13
Joined: Wed Dec 31, 1969 5:00 pm

Post



This is my 1972 Datsun 521.

Pac. coast Datsun
Posts: 286
Joined: Wed Dec 31, 1969 5:00 pm

Post

Welcome Havenlamar. Ive seen your 521 over at Nissan mini's. The ground effects are cool.

havenlamar
Posts: 13
Joined: Wed Dec 31, 1969 5:00 pm

Post

thanx man I specially made them.  A =lot of people are into droppin theres but I did it cheaper and smoother riding

 

71-521
Posts: 621
Joined: Wed Dec 31, 1969 5:00 pm

Post

how about some closeup pics?

User avatar
IMH
Posts: 350
Joined: Wed Dec 31, 1969 5:00 pm

Post

Here's a shot of my 64 L320 at the Japanese Classic Car Show

71-521
Posts: 621
Joined: Wed Dec 31, 1969 5:00 pm

Post

Very Nice!

Pac. coast Datsun
Posts: 286
Joined: Wed Dec 31, 1969 5:00 pm

Post

IMH your 320 is very nice. Ive seen pics of it before & was wondering what kind of carb setup you have?

User avatar
IMH
Posts: 350
Joined: Wed Dec 31, 1969 5:00 pm

Post

Pac. coast Datsun wrote: Quote »IMH your 320 is very nice. Ive seen pics of it before & was wondering what kind of carb setup you have?[/quote] 

It's a Weber 40DCOE with 26mm venturi on a manifold designed for an MG.  I did that years ago with a few junkyard pieces so I'm not really sure exactly what vehicle the linkage I'm using came from.  The intake maniofold is odd in that is has no markings of any kind on it.  It has shorter runners than other manifolds I've seen which makes it fit better since the carb and air cleaner is not as close to the fender well.

Pac. coast Datsun
Posts: 286
Joined: Wed Dec 31, 1969 5:00 pm

Post

Thats a clean setup! Ive heard some of the MG engine parts swap over such as the heads. How much more power does it have now compared to the stock carb?

User avatar
IMH
Posts: 350
Joined: Wed Dec 31, 1969 5:00 pm

Post

First off, the engine is a J16.  It has a modified MGB header, a solid breaker plate in the distributor, electric fuel pump, aluminum flex fan, a mild cam and port matching on the head which was done by a now non existent machine shop that was located in Hacienda Heights, along with a 280Z clutch, a 200ZX 5 speed, a 3.70 roadster differential, etc.  It runs along with freeway traffic and pulls hills with no problem.

Stickerman
Posts: 2
Joined: Wed Dec 31, 1969 5:00 pm

Post

Well I am new here so I will at least post a photo of my  65.  This truck is my first old Datsun truck, but I do have 5 Roadsters!

65 320 with 65K miles on it!



 

71-521
Posts: 621
Joined: Wed Dec 31, 1969 5:00 pm

Post

very nice and Welcome!

Pac. coast Datsun
Posts: 286
Joined: Wed Dec 31, 1969 5:00 pm

Post

Very original 320! Welcome to the site.

phatdave
Posts: 21
Joined: Wed Dec 31, 1969 5:00 pm

Post



 

Heres my '73 620 with new junkyard mags!

bagd620
Posts: 2
Joined: Wed Dec 31, 1969 5:00 pm

Post

I just have to get in on this. Here is my '79 620

 

71-521
Posts: 621
Joined: Wed Dec 31, 1969 5:00 pm

Post

Welcome! very nice 620...what size tires are you running and what year were those rims off of?

kenbagby
Posts: 183
Joined: Wed Dec 31, 1969 5:00 pm

Post

Looks like Bagd620 is going to have to pull to the other side of the pumps! Unless he has the illusive dual 620 tanks :) Nice truck, I'd like to know about the tire size too. Ken

Pac. coast Datsun
Posts: 286
Joined: Wed Dec 31, 1969 5:00 pm

Post

Paul thats my friends 620...I believe the tires are 225/35/18's & the rims are off a Titan.

bagd620
Posts: 2
Joined: Wed Dec 31, 1969 5:00 pm

Post

yeah they are 225/35/18's off of a new titan and the gas tank is in the bed had to move it for the four link didnt want it to ignite on me.


odpl_Razor
Posts: 148
Joined: Wed Dec 31, 1969 5:00 pm

Post

Here's mine.... will take a better pic later

N320 and B120


64nl320sportlover
Posts: 27
Joined: Wed Dec 31, 1969 5:00 pm

Post

heres a pic of my 320

64nl320sportlover
Posts: 27
Joined: Wed Dec 31, 1969 5:00 pm

Post

heres a pic of truck i was looking on crigslist at it was 4 k

zacko43
Posts: 23
Joined: Wed Dec 31, 1969 5:00 pm

Post

Are you in Arkansas? I'm looking for 620's close to me for sale.  If ya spot any, pls forward.

ratsun
Posts: 8
Joined: Wed Dec 31, 1969 5:00 pm

Post

Here is one of my 71 with Nissan parts rebuilt L16, Weber, header, p/p head, Nissan clutch, water pump, gaskets and motor mounts:). Nissan king pins and a-arm bushings go in next week!

I built this little truck for my grandpa's 80th b-day. He drove it for a few years and hauled all kinds of stuff in the LineXed bed, then called and said I could have it back this last year...:) So it lives in Denver now...anybody out there from Colorado?

Thanks for all the great work on the site guys!

Nissan Diesel owners, I found a 720 with a motor still in it here in Denver...?

Anyone got seat belts that I could buy? I tried some 76 Zcar belts but they are too short for the bench...Let me know...or if you need some rear Z belts.

 

ratsun
Posts: 8
Joined: Wed Dec 31, 1969 5:00 pm

Post

Maybe one more... this truck is really fun to drive and gets comments every single day. My dad did the pinstriping...way cool!

straycat60
Posts: 16
Joined: Wed Dec 31, 1969 5:00 pm

Post

your truck looks great. i just got a 65, 320. needs abit of work, but i love it. what size tires are on your truck ? i want to go with a stock size, but radial. thanks, mike


Return to “Datsun Chat”