Pics of my Rb swap so far: Big pics

[accel junky]

Well everything is hooked up and wired. Just working on trying to find a new starter or someone to fix mine. When I get it started I'll clean up the wiring and take it to the body shop for the window/ paint to be done.

But heres the pics so far.

[Yellow4g63]

What exhaust is that?

[BoostFab]

imagestation sux...put pictures in Nico Member's ride section

[JonPowell]

More beautiful RED X'S!!!

[xjon]

looks good. The engine bay looks good also. Nice catch can and bov. Like the way you got things hooked up. good job.

[accel junky]

Exhaust is Apexi GT-Spec

No more red x's just changed to my work server.

[T_love]

That looks really good. What IC is that?

[accel junky]

IC is a Spearco custom bought from boostcoolers on ebay. Bar and Plate, 3in deep, thumbs up!!

[NotDave]

i see another 240 in the backround :o

[PANGES]

the piping for the Gt Spec looks like it hangs pretty low... hehe, i have the same exhaust for my s13 and an hks ssqv also.... where's that 1 inch hose from the bov connect to? i dont see it connected to the intake manifold

[Imissmyturbo]

WOW!! Looks very bad ***!!

[accel junky]

Thanks for the compliments!

PANGES: The 1in hose from the bov goes into the intake, after the airflow meter, just like stock. Gt-spec does hang low, I'm kinda worried if I eventually lower it, because I always like to slam it.

[Ecnorcs1]

I like it alot good work

[Altiman94]

looks nice

[PANGES]

Thanks for the compliments!

PANGES: The 1in hose from the bov goes into the intake, after the airflow meter, just like stock. Gt-spec does hang low, I'm kinda worried if I eventually lower it, because I always like to slam it.

ohh, i see, makes sense... about your exhaust: u ever consider using 18" rims and then lowering it? almost get the same look and but farther off the floor... i've seen 18's on an s13 with a bodykit and it looked good, dunno how it would look without one... tell me how it goes after u lower the car though because I'm gonna be in the same boat as u

[accel junky]

PANGES: dunno about 18"s, if I kept the overall tire height that wouldnt solve anything if I lower it unless I got bigger tires as well, which would throw off my speedo/gearing.

The exhaust should be ok i guess... but my lower intercooler piping will have to be modified to clear the ground if I were to lower it alot.

17"s seem like the perfect choice to me. Good looks, not too much performance sacrifice... not to mention these cast 5zigens weigh like 16lbs each.

[Nameless EJ6]

Hey I have an RB25DET starter laying around. Email me if interested: [email protected]

Looks good!

[accel junky]

Nameless EJ6: tried to send you an email about that starter, but it got kicked back. Check your PM or email me at [email protected] with some infor like why you're wiling to part with it, condition, etc... Pics

Thanks,Daniel

[PANGES]

accel junky: what size did you get for the intercooler? i was considering one of those bar and plate intercoolers also

[accel junky]

PANGES: I got the 24"x12"x3" from boostcoolers on ebay. Its a nice piece of work and very sturdy. has 2.5" inlets.

Haven't run the car yet obviously, so I cant comment on performance yet.

[DSMwantsaSR20DET]

Who did your wiring? thanks Josh

[accel junky]

DSMwantsaSR20DET: I did, its not hard.