Philly...Philly...Philly

[OutToWinPAHC]

Yeah im just bored, figured Id post and see who responds. Well if your in the area post some pics or info about your ride, tell us about yourself, maybe set up some meets and maybe we can help each other out

But I'm Kevin I'm 24 and from Mayfair, and I do electrical and electronics work. Cars, girls, beers, guns, video games are all my thing. If you need help just ask, I can wire up anything.

I have a 1986 GMC Sonoma (It moves a day a week about and will be a future engine swap project truck)07 Honda CRV (company car)1991 240SX Hatch with a LS engine, and Silvia S15 front end conversion (going into the body shop next week)



t

[thefro526]

My name's Dustin I live in Willingboro New Jersey which is about a half hour from Philly depending on where you're going. I drive a 91 hatch with a busted windshield and yellowing bumpers. The only mod so far is a Walbro Fuel pump and I'll have a Megan racing exhaust by the end of next week. I like Nissans Drifting and robotics and I'm a full time high school student and I do some BS work on the side. Hit me up on AIM at thefro526, email at [email protected] or [email protected], or my myspace is http://www.myspace.com/thefro526

Here's a pick of my hatch:



The front bumper isn't yellow any more it's light shade of grey. Any things better than yellow i suppose...

[OutToWinPAHC]

Looks pretty clean, just some faiding. If you do plan on doing some work let me know. I find alot of parts locally and have some shop connections.

Aim - OutToWinPAHChttp://www.myspace.com/Kevoshardcore Mehttp://www.myspace.com/ls6240sx The Car

[Chaotic_Warlord]

Yo dude where in Mayfair do you live, I'm around 1 block from the Mayfair Diner. I'm looking for people in the area to hang out with and cruise with when spring gets here. since you live around the corner then there's no reason for us not to hang out.

Name's Brandon, I'm 31, NE Philly (Cottman & Frankford area). 95 S14Xbox live Gamertag CHA0TICWARLORD. I'm install fire and security systems in residential and commercial properties.

[OutToWinPAHC]

Im down near Chickies and Petes. Yeah I work on VERY VERY large UPS systems. And me and a buddy just started our own electrical contractor company (licensed, insured, the whole nine).

I dont use the xbox live enough, but on there its OutToWinPAHC and on PS3, and on aim.

Yeah just email me or something

[email protected]

[eDmSiL80]

Names Mark Manansala im from elwood nj (middles of the sticks) I'm 18 years old and own 2 240's. I have been drifting for 3 months out of a season and plan to continue doing so as long as i can. I currently have no job and attend a community college. But my brother and his partner are planning to open up a shop called pride performance in freehold nj. I would like to help the car community as much as possible and we are starting to make great relationships with top name manufactures. The shop is scheduled to be open april 1st and i will post an announcement when the time comes.

This is my very first 240, i was 16 at the time.

The motor that would've been nasty. First full-race exhaust mani for a ka, gt28, and an xccessive intake mani.

Unfortunately the car was stolen and many of the parts were gone. Im currently in the process of rebuilding the car and making it badder then ever.

This is the first stage of my street car stock sr

My first ever drift event

Then did more of this

Then i got the car redone

and did some more of this

then i went to viri ended up qualifying 12th out of 35 drivers, was my first time at that track, and first time ever drifting that fast.

my plan for 08

please don't misjudge me cause i look like a drifting billboard. Im a normal 18 year old kid trying to enjoy life. I like to snowboard, play video games, and party. Im here to help, and i will post about my brother's shop in the future and hopefully i can somehow make it a vendor on here.

contact:[email protected] sn-xxt3graznxxxbox tag-pridesil80 so far i only play halo 3

[thefro526]

Looks pretty clean, just some faiding. If you do plan on doing some work let me know. I find alot of parts locally and have some shop connections.

Aim - OutToWinPAHChttp://www.myspace.com/Kevoshardcore Mehttp://www.myspace.com/ls6240sx The Car

How good are you connections? I need a windshield installed for like $200. My current one has a big crack in it. Also I added you on myspace so you can message me there or hit me up on AIM

eDmSiL80 what kit were you running on you car before it got stolen? That car is my desktop background. I love Sil-80's with bricks

[Chaotic_Warlord]

How good are you connections? I need a windshield installed for like $200. My current one has a big crack in it. Also I added you on myspace so you can message me there or hit me up on AIM

there's a place in Philly @ 61st and Passyunk that installed a new windshield on my S14 for $185

[thefro526]

Do you have a phone number for them?

[M3T4L156]

Hey everybody,My name is Mike, I'm 16 live in the Lancaster County area. Yea good Amish!! not really.... I was born in Brooklyn, NY so it's really different in this area. But anyway, just bought my first car. 1989 Nissan 300zx, it's in the shop at the moment because it needs a new heater core. And, it's pretty much stock. I'd like to mod it but need help because I just recently got into cars. Here's a picture of my Z31 though.

[gregfarz78]

My name is Greg I live in the burbs, don't own a 240 right now but I'm working on buying a 89 coupe + vq35/6 spd hopefully the deal goes smooth That LS6 240 is badass, did you do the swap yourself?

My daily driver right now is a 02 spec v, its been a solid car for me thats why I decided to stick with nissan and look for a 240sx

[M3T4L156]

A buddy of mine just got an auto 90 240sx hatch. That convinced me to get my Z31. You'll really love the car. They're amazing!

[thefro526]

Nice Z31 I'm guessing it's NA. I was about to buy a turbo one for like 600 bucks but the lady didn't have the title so It wasn't worth the deal cuz it was gonna need like 1500 bucks worth of work

[M3T4L156]

Yea it's n/a, but hey I can't complain it's pretty sweet for a first car.

[thefro526]

Got any long term plans for it?

[M3T4L156]

So far I just want to lower it, rims, exhaust system, tint the window, a different sound system, and hopefully in the long run turbo it.If you have suggestions I'd like to hear them.

[thefro526]

I don't really have any suggestions for it asside from swapping some of the turbo tails on it and some nice fender flares.

[M3T4L156]

haha I don't really know what those are XD

[Chaotic_Warlord]

Do you have a phone number for them?

Sorry for the delay, had to get the receipt out of the car and I forgot where I put it.

Anyways, the name of the place is B&L Auto Parts & Auto Glass, the address is 3304 S, 61st Street Philadelphia PA 19143. The phone number is 215 726-9955.

I have a 95 S14 and they got me a new windshield + labor to install for $185. they are open on Saturdays, I got there @ 9 they got there @ 10 and I was out the door with the new windshield by noon. Your windshield should be the same price or cheaper.

[jdmwill]

i dont post mush here only when i decide to have a drift meet over ikea.lol my name is will ortega i live and work in north philly.im the guy responsible for building kaleo55 s14.even thou i dont currently drive a s chassi.i build and drift them all the time.some of you may know me more as one of the two guys responsible for the 240 meets over in ikea.that turn to drift meets and eventually to rice meets....dam hondas.i currently drive a ae86 gts but use to drift around the light blue ae86 hatch silvertop powered.

if you guys want to see kaleo55 s14 its currently under light reconstruction at my shop.1555 n.5th philadelphia pa 19123.the shop is called northern liberties.

[Chaotic_Warlord]

Will couple questions for you...

1)What are your shop hours? Are you open on Saturdays?

2)Do you have any used S chassis diffs laying around? I need one.

3)What going on with Kaleo's S14?

4)Does your shop have a web page yet?

[jdmwill]

Will couple questions for you...

1)What are your shop hours? Are you open on Saturdays?mon-sat 8 to 6 or open till later if need be.

2)Do you have any used S chassis diffs laying around? I need one.vlsd or welded ?

3)What going on with Kaleo's S14?wear and tear and hopefully more cool new parts.

4)Does your shop have a web page yet?

http://www.myspace.com/northernlibertyautorepair its a myspace for know atleast until kal finish designing it

[jdmwill]

Yeah im just bored, figured Id post and see who responds. Well if your in the area post some pics or info about your ride, tell us about yourself, maybe set up some meets and maybe we can help each other out

But I'm Kevin I'm 24 and from Mayfair, and I do electrical and electronics work. Cars, girls, beers, guns, video games are all my thing. If you need help just ask, I can wire up anything.

I have a 1986 GMC Sonoma (It moves a day a week about and will be a future engine swap project truck)07 Honda CRV (company car)1991 240SX Hatch with a LS engine, and Silvia S15 front end conversion (going into the body shop next week)



t

sweet jesus thats what i call a swap.pure sex bro.

[OutToWinPAHC]

Thats alot man, its coming along pretty well, its in the body shop now, and I finally picked a color. Funds are low, but I still have work to do. If anyone feels like helping out let me know, it would be much appreciated.

I need to know someone who is good at working with wood. The rear seat is out and I want to clean the look up with a formed wood platform that is carpeted to match and may have one sub I dunno yet.

Then I need help with the brakes, I just hate working with brakes but I am swapping over to 300ZX 30mm and I have my 5 lug swap hubs allready.

Other then that, its fans, oil cooler, indash computer and ODBII management, paint and interior.

If you have a shop and want to help out please email me.

[Chaotic_Warlord]

Thats alot man, its coming along pretty well, its in the body shop now, and I finally picked a color. Funds are low, but I still have work to do. If anyone feels like helping out let me know, it would be much appreciated.

I need to know someone who is good at working with wood. The rear seat is out and I want to clean the look up with a formed wood platform that is carpeted to match and may have one sub I dunno yet.

Then I need help with the brakes, I just hate working with brakes but I am swapping over to 300ZX 30mm and I have my 5 lug swap hubs allready.

Other then that, its fans, oil cooler, indash computer and ODBII management, paint and interior.

If you have a shop and want to help out please email me.

Dude I pretty much live around the corner from you, so I'll lend a hand, I'm fairly decent with woodwork and whatever I don't have tool wise my gf's dad definately has. I don't have a shop but if you have a driveway or some semblance of one I'll be able to help out with whatever I can. When this disgusting cold weather decides to go away I'm more inclined to go out and cruise or whatever.

[jdmwill]

Thats alot man, its coming along pretty well, its in the body shop now, and I finally picked a color. Funds are low, but I still have work to do. If anyone feels like helping out let me know, it would be much appreciated.

I need to know someone who is good at working with wood. The rear seat is out and I want to clean the look up with a formed wood platform that is carpeted to match and may have one sub I dunno yet.

Then I need help with the brakes, I just hate working with brakes but I am swapping over to 300ZX 30mm and I have my 5 lug swap hubs allready.

Other then that, its fans, oil cooler, indash computer and ODBII management, paint and interior. If you have a shop and want to help out please email me.

sooooooo i was at my good friend peter's shop "fivestarauto" and i saw a lil something there.just to let you know im part of driftnasty along with reese,bea,brian,ricky,obee.small world bro and of course any help you need let me know.

[OutToWinPAHC]

5 star is the shop doing my body work, Peter is takig care of me over there.

So the little something you sa, was probably my car getting the front end swap done

[jdmwill]

funny peter was will you got to come here know.lol.peter is a good friend and he is a excellent painter.i would go nowhere else.

[beatd]

sup all. my name is Dann Miranda and i live in woodlynne NJ about 5 minutes from philly and across the street to CAMDEN!. my car is safe in the garage every night except for my tools which recently got stolen, but yea i'll post pics of my car build later on. only mods i got so far is megan streets coils and i'm in the process of collecting turbo parts. thats it so far feel free to hit me up and meet up!

AIM: beatdphone: 856-246-8576email: [email protected]

[foamcup]

Your getting your paint job at five star =/, how much?

My name is tony, i have three 240sx, currently all projects. I go to school and work full time. Other than that, i don't have much of a life haha.

91 hatch that i just picked up as my ka-t side budget project.90 hatch has a sr20det, current project.92 coupe has a s13 front (ls1 project) my all out project (long term)07 frontier crew cab le, as my daily driver.

If you guys need anything let me know, i have a bunch random parts laying around. Beatd are you looking for any turbo parts?
Modified by foamcup at 1:25 AM 1/24/2008