PEZi's 720 Part Out! Get some!

[rontwo]

Pez would you happen to have a power steering pump? If you do let me know. Thanks

[PEZi]

I don't. I got rid of that about 3 or 4 years ago.

[rontwo]

Are the brake master cylinder and clutch master cylinder still available? If so let me know thanks

[PEZi]

They are still in the truck, but will most likely be going with the drivetrain. I will let you know if that changes.

[Shakotan720]

Still have all these?
PRO-NET TAILGATE NET $35
OIL AND VOLTAGE GAUGES$10
GAUGE CLUSTER $10
COOLANT OVERFLOW TANK $15

If so I'll take them. PM me price shipped to 30040.

[PEZi]

Consider the tailgate net, overflow tank, and oil & volt gauges pending! I'll figure out the price shipped within the week for you.

[Shakotan720]

Just let me know, and send me your paypal addy.

[PEZi]

Ok, guys. The full thread has been updated. For those interested in the parts that were pending, I now have names next to the remaining pending parts.

I currently have it listed that someone requested the fuel pump relay, but I looked through my records and could not figure out who that was. I still need to get to the post office to check on a few things, but everything is pretty much updated.

The drivetrain is GONE... the brake and clutch master still remain!

[720momo]

do you still have the fuel pump?

[flinterman2000]

Sent you a PM but its not going through. I got the B12 dash so I won't be needing the cluster anymore. I hope what I sent is enough to cover shipping.

[spider2k]

I'd like the cluster, two gauges, fuel door pull, door handles, and relay. PayPal at the ready if you still have them. thanks.

[PEZi]

do you still have the fuel pump?

fuel pump is still available!

I'd like the cluster, two gauges, fuel door pull, door handles, and relay. PayPal at the ready if you still have them. thanks.

the cluster and gauges are claimed, but if you'd like the fuel door pull, handles, and relay, those are still available

[spider2k]

well if the cluster falls through I'll buy it as well as the outer handles and fuel pull.

[boilerman]

is the sterring gear box still availiable...located by the front tire on the drivers side...

[pistolkeith]

im interested in the NGK wires. what are you willing to let em go for? and shipping to Toronto? M4R1E4 is the zip.

cheers

[jackspade21]

Any chance you have the steering wheel?

[flinterman2000]

Sent you a PM about the tri Gauges. Need some info.

[oestradal]

do you still have this items?

- GAUGE CLUSTER
- OIL AND VOLTAGE GAUGES
- COOLANT OVERFLOW TANK

i´m interested.

thanks

[dirtdog]

I am new! just checked out alot of the threads. This is great, thanks for your part in it. You seem to have a lot of available crashed trucks to get parts from. Also you seem to know what you are doing. I appreciate that. I was a mechanic for a lot of years (a long time ago) and I like doing things on my own. I am wanting to alter my front fenders to accommodate larger tires 31-10.5-15s (already on my truck). On my first truck I put some heavy duty torsion bars and lifted the front end that way. I can't find the T-bars now, and think I will alter the body work a bit.
Any ideas on the best way to accomplish this? Or is there someone you can steer me to. I live in Maine and my resources here seem very limited. I have scoured the country side and can't find anyone who wants to play!
Thanks for what ever help you may offer
DD

[PEZi]

Guys... I have been and will be MIA for another 2 weeks. LOADS of cool things happening for me in the racing world! Keep holding in there.... I'll have all of your parts quoted up in the near future...

[synack7350]

glad to hear pez. when you get back lemmie know if you have the windshield washer resevoir with pump kicking around somewhere. My pump leaks it has a little crack at one of the screw holes. attempts to repair have failed.

[radracer]

original post shows the gauge cluster as still being available. If so, Id love to grab it.

[dirtdog]

Are those door handles still available? How much to ship to Maine?
Drop me a note at [email protected]
That e-mail address will work for the door belt molding I asked about and the cowl sleeves in your post from 7-1.
Thanks
dirtdog

[radracer]

Dashboard still available?

[720momo]

fuel pump - email me @ [email protected] thanks man

[dirtdog]

How about the torsion bars? Are they in good condition? I assume they are stock. It would be to much if they were heavy duty. How much for the bars and shipping to Maine? PM me when you get back to it.
Thanks
DD

[PEZi]

Once again, sorry for being out of the office. The big race that we had so much work for is now officially over. I have time for my NICO peeps again! so...

Goodnews: I'm back!
Badnews: I won't have updated parts list until I get home and look at what's left. I honestly don't even remember off hand at this point since its been so long. Hang in there guys! I'll have a fully updated list and responses to each of your responses in the thread within a day or so.

Othernews: The whole damn truck is not for sale.... Rolling shell, baby!