PDM Racing eccentric bolts?

[xekushnr]

My S13 is running KYB GR-2 struts/shocks and Tein S-Tech springs. I believe those springs lower the car 1.5" in the front and 1.2" in the back. First of all, yes I know camber plates are better. I really dont want to spend the money on it yet though. With this setup would I be ok to use some eccentric bolts to adjust the camber? Who has used the PDM bolts? Are they good? Who is better?

Thanks guys!

[gumby74]

Considering what you have going on, eccentric bolts will be just fine.It's once you exceed 2" of drop that the eccentrics are out of adjustment range.

[xekushnr]

Thanks bud. Are the PDM Racing bolts fine or is there something else you would recommend?

[gumby74]

That I am aware of there actually only 2 or 3 true manufacturers of the product. No one is really better than the other. Just don't overpay. They should run you no more than $30 to your door, otherwise shop around.

[xekushnr]

Sounds good, thanks for your help Juan!

[adrianfromthecastle]

No one is really better than the other. Just don't overpay. They should run you no more than $30 to your door, otherwise shop around.