Pathfinder Light = SICK mod.

[SBK03SE]

So I was browsing CarDomain, found something neat, thought I'd share.
Link here http://www.cardomain.com/ride/480134/20 ... der/page-2

Basically a printed overlay that goes over the brake light. I think I want to do it too!





credit to husspath2k3 @ cardomain.

[Innovazn]

Theres like... 3 other guys that have done it already.... Me... Slick Roger... and someone else (forgot who)

[SBK03SE]

Ohh. How much does it run? I'm interested.

[Innovazn]

Ohh. How much does it run? I'm interested.

Ebay - 5 bucks LOL or to some local ricer shop with a sticker machine for 15 bucks.... just get them the measurements.

[naladude911]

mine says
INFINITI

[InfinitiEric]

mine says
RICER

[01silvapathy]

Those have got to be good for what atleast 5hp right?

[SBK03SE]

Some people reported gains of 7-8hp. It's worth a try.

[Ron Burgundy]

*sense of humor appreciated*

[SBK03SE]

*sense of humor appreciated*

I'm going to get a huge wing in the back too.

[rydebynite]

Theres like... 3 other guys that have done it already.... Me... Slick Roger... and someone else (forgot who)

you forgot about me damnit lol! well i actually ended up taking mine out. I had a hard constructing type paper cut out at first and after a couple months of the sun baking it up it started to look like crap. I then had one made from a vinyl sticker and the sun baked that up too and it started chipping an flaking off inside the case and it looked all whitish so that was the end of that

[Innovazn]

Theres like... 3 other guys that have done it already.... Me... Slick Roger... and someone else (forgot who)

you forgot about me damnit lol! well i actually ended up taking mine out. I had a hard constructing type paper cut out at first and after a couple months of the sun baking it up it started to look like crap. I then had one made from a vinyl sticker and the sun baked that up too and it started chipping an flaking off inside the case and it looked all whitish so that was the end of that

mine is suffering from that but i put it on well enough for it to bake onto the plastic and it still looks fine.

[donald]

Those have got to be good for what atleast 5hp right?

I was under the impression that you had to have an available 5HP/2ft-lb before adding this mod in?

kidding aside... i need to fix my 3rd brake light before I attempt something like this. when I went to change my bulbs i found a few tabs broken.
i know the stickers don't need to be supported by the tabs or whatnot, but I just want it to be "healthy" before I start throwing "fun-stuff" on it.

[Innovazn]

Those have got to be good for what atleast 5hp right?

I was under the impression that you had to have an available 5HP/2ft-lb before adding this mod in?

kidding aside... i need to fix my 3rd brake light before I attempt something like this. when I went to change my bulbs i found a few tabs broken.
i know the stickers don't need to be supported by the tabs or whatnot, but I just want it to be "healthy" before I start throwing "fun-stuff" on it.

so is it hanging there or something?

[vile]

had no idea there was a 3rd brake light

[donald]

so is it hanging there or something?

no, but the tabs that hold the bulbs in place seem to be cracked and broken, making the bulbs a little "crooked" when it's activated. Meaning, some bulbs are lower than others and pointed in different directions and does not create the straight horizontal line across.

had no idea there was a 3rd brake light

ok ok, sorry.
what's the official name for it?
High Mounted Center Brake Light or something like that?

[Towncivilian]

CHMSL - Center High Mounted Stop Light.