Passanger 1/4 window
-
wannaskyline
- Posts: 15
- Joined: Sun Nov 05, 2006 12:08 pm
- Car: 1993 240 Convertible
Passanger 1/4 window
My passanger 1/4 window is folding forward when I roll it up. When I look down the slot It looks like there is a plastic piece that keeps it on track on the drivers side the passanger side doesnt have it. Anyone have one? I cant find ne anywhere. Thanks
Re: Passanger 1/4 window (94_240sx)
How did you get the metal clips to stick to the guide? I tried, but could never get it to line up right, time to make some diff metal brackets .
Re: Passanger 1/4 window (brokeAs240sx)
There's no space or slack, so it's got stuck there like that. I didn't use any glue.brokeAs240sx wrote:
How did you get the metal clips to stick to the guide? I tried, but could never get it to line up right, time to make some diff metal brackets .
Re: Passanger 1/4 window (94_240sx)
sweet, time for me to test different metal thicknesses, haha. thanks!
Re: (Hijacker)
^^^ I actually contacted him a while back & he no longer works @ the bowling alley .
I've sinced made a crappy substitute that for the most part works out of nylon spacers found @ home depot - not pretty @ all because of the way I cut them up, but holds all right.
I'm considering experimenting w/ rubber spacers & grease if I can't do the nylon trick cleaner.
I've sinced made a crappy substitute that for the most part works out of nylon spacers found @ home depot - not pretty @ all because of the way I cut them up, but holds all right.
I'm considering experimenting w/ rubber spacers & grease if I can't do the nylon trick cleaner.
-
DeXteR
- Posts: 2702
- Joined: Sun Sep 25, 2005 9:01 pm
- Car: '14 Nissan Titan Pro4X
'05 Nissan Xterra OR
'92 Nissan 300ZX Slicktop
'94 Nissan Sentra RS Rally Car - Location: Beulah, MI
- Contact:
Re: (Hijacker)
I'm going to have to tear into my vert and do this soon. My quarter windows are starting to suck pretty bad.
Re: Passanger 1/4 window (brokeAs240sx)
I already did. For the template, I used a Coke can, and cut a small garden shovel from Target. It wasn't easy to cut, but I eventually made it. Perfect thickness and strength...brokeAs240sx wrote:sweet, time for me to test different metal thicknesses, haha. thanks!
-
S13xCrazy
- Posts: 2642
- Joined: Sun Oct 08, 2006 2:54 pm
- Car: 1993 240sx Vert, 1993 BMW 325i, 1993 Honda CBR F2, 1998 Infiniti Q45,
Re: Passanger 1/4 window (94_240sx)
^^no plasma cutter or grinding wheel??
Re: Passanger 1/4 window (S13xCrazy)
I just used metal snip. I wish I had something like that. Most advanced power tool in my garage is Dremel.S13xCrazy wrote:^^no plasma cutter or grinding wheel??