parts to keep from ka24e ? CA18DET swap

[turbodcivic]

like it says, is there any particular parts i should keep pther then the engine harness and transmission harness? like hoses or sensors or anything. lmk asap becuase i need the motor gone so i can store my new one

[bone_stock_240]

I think you keep the MAF if I remember correctly.

[r34 gtr]

the throttle body, and the maf if you want, but its not necessary unless you know you wont be getting a maf with your motorset.

[turbodcivic]

ok yeah the MAF is attatched the the engine harness right? kinda like a U shaped thing that has to screws into the air box?

and the throttle body? just because its a little bigger?

anything else? like radiator hoses, fans, belts etc etc

[r34 gtr]

the tb is 5mm larger i believe, so its a nice upgrade. youll have to open up the intake manifold a little so it will fit properly, but it bolts right up. other than that there isnt much you need. might want to keep the transmission as a spare.

[turbodcivic]

the transmission was the reason i pulled the motor, it got stuck in reverse. i think a shift fork broke or something

[ca240sxcoupe]

keep a hold of the harness just incase you need some connectors or some extra wire to extend things.....make sure to keep shielded wire...it always comes in handy

[mbmbmb23]

the tb is 5mm larger i believe, so its a nice upgrade. youll have to open up the intake manifold a little so it will fit properly, but it bolts right up. other than that there isnt much you need. might want to keep the transmission as a spare.

So the KaE TB is the one that has the coolant lines that match up and not the KaDE?

thanks,

-M

[turbodcivic]

So the KaE TB is the one that has the coolant lines that match up and not the KaDE?

thanks,

-M

thats what its looking like.