Parts need for sr20det swap

[9Dsx_Drvr]

Ok I am still new to the site and to imports. I have a 90sx and I am buyinga red or black top s13. I have been through the parts guide thread. But my question is:When I get this motor home and get ready to install it. What parts to I have to have before I start and get this motor running.ie. Some motors don't come with the MAF. but, I noticed on the parts guide it says to use the 89-90 sohc ka MAF. Well hey I got that covered.

Thanks for your helpTony

[driftjunkie209cali]

hey, bro. i recommend you to change your water pump, because the motor been sitting for too long, it create cavity rust inside your old water pump. don't belive me, just open up! and u thank me. hope this tip help prevent your motor from freeze

[mallbor240SR]

if you want to keep the power steering you will need the 91-94 PS lines.you will also need a DOHC cluster.and a downpipe

[Badfish]

Ok I am still new to the site and to imports. I have a 90sx and I am buyinga red or black top s13. I have been through the parts guide thread. But my question is:When I get this motor home and get ready to install it. What parts to I have to have before I start and get this motor running.ie. Some motors don't come with the MAF. but, I noticed on the parts guide it says to use the 89-90 sohc ka MAF. Well hey I got that covered.

Thanks for your helpTony

http://srownersclub.com/faq/index.asp http://srownersclub.com/faq/faq_needed.asp