PARTING OUT a spare CA18DET

[NeedCAforS13]

I have a RWD CA18DET thats just taking up space in my garage. I pulled it apart last night because the previous owner told me he spun a rod bearing. He was correct, #2 rod bearing was just not there. haha! So needless to say those pieces of bearing were in the motor and scratched up the other rod bearings and main bearings. **edit, upon closer inspection in the daylight and with more sleep, the crank definatly needs some work done. it has scoring damage and chunks of rod bearing stuck to it. I would send it to a machine shop before using it!** hence the cheap price.

The clutch/flywheel set up has an almost new OEM nissan KA24DE clutch on it. I drove this car before he spun the bearing and it drove nice. The clutch wasn't super strong, but it worked fine, felt stock!

Stock CA18 T25 has no shaft play, but there was oil on the intake pipe, so I think the seals might be going. Again, probably would reccomend rebuilding it, so its going CHEAP!

I'm parting out the motor, all prices listed below DO NOT include shipping. Stuff like the block is probably pick up only, unless you live in Florida and want to meet me halfway or something.

If you get back to me today, I can bring any parts up to Atlanta with me, I'm going there on Sunday for vacation...

Prices:Head $100 Head (bare) $50 Block $75 Alternator $30 A/C compressor $30 Intake manifold $50 Exhaust manifold $25Sensors $50 Fuel Injectors (dsm blue top 450cc) $75 clutch/flywheel $100 crank $25 stock t25 $755 speed transmission $150

any other parts from the motor (pullies, motor mount brackets, etc...), just ask! the rods/pistons are not for sale. and I don't have any motor mounts on the motor chris.

I can get pictures of any parts, just ask My email is [email protected] or AIM SOlsenA6 or just reply here.

[Akihisa]

Can you bring a head up to Atlanta. I'm in athens so where in at Atlanta are you going to be.

[c-rad]

and I don't have any motor mounts on the motor chris.

[GAY] Well, its good to know you're at least thinking of me [/GAY]

[NeedCAforS13]

Can you bring a head up to Atlanta. I'm in athens so where in at Atlanta are you going to be.

I will be in Gainesville for most of the time, but staying downtown at the Marriott for afew days. I can bring the head up no problem. You want the complete head or the stripped down head?

[gore]

so they gave you my motor huh sean?

[NeedCAforS13]

(bought it) but yeah. dude, you had NO rod bearing on #2. It was all over the oil pan... did you run it low on oil or what happened?

and I forgot to mention in my first post, I have multiple of some of the engine parts (2x alternators, 3x heads, 2x blocks). So even if someone buys something, ask if I have another.

injectors and stock t25 turbo are pending sale. I just have to figure out shipping costs.

[gore]

dont get so defensive I just thought it was funny, ps I wouldn't sell that turbo unless they plan on rebuilding it, its seals were busted thats what burnt through all my oil. also those injectors should be 450's. fyi

[gore]

that turbo also at one point siezed on me and magically started working again. hocus pocus

[NeedCAforS13]

I wasn't getting defensive. And I figure the turbo seals were blown, hence the low price and the comment about oil on the intake pipe

thanks for the heads up on the injectors, I wasn't sure how big the ones you had were. I knew they weren't stock, but I wasn't sure what flow rate they were.

[NeedCAforS13]

bump! leaving for atlanta today... with a head in the back of the truck. if you want it email me and we'll meet up in atlanta area.

[email protected]

[Akihisa]

Sean, I just e-mailed you.

[PantherRacer]

how much would it be to get that turbo rebuilt?

[GoofyATX240]

Hey Sean do you have any valve covers?

[zil40]

was wondering if injectors are sold or not

[1via]

ignitor?

[anumeric]

Im looking for a non-hicus power steering pump.

[NeedCAforS13]

Hey Sean do you have any valve covers?

yes. and front covers too.

injectors are pending sale, but I do still have them. I'll let you know if it falls through.

I can get an ignitor if you need one. C-Rad also has afew laying around, and he's a good guy to get them from.

I'm back in Orlando, but I'm on my way out for st. patty's day, so I will reply to emails tomorrow morning.

[c-rad]

Im looking for a non-hicus power steering pump.

Does that mean you have a hicas PS pump? If so, I want to buy it from you.

[Rage_sixtynine]

I am interested in the alternator and a power steering pulley if you have one. I think my alternator is going bad and my power steering pulley was bent durring shipping. You can leave me a message through NICO or email me at [email protected]

ThanksTrent Christopher

[Rage_sixtynine]

I guess I dont even know my own email address, email me at [email protected]

Thanks,Trent Christopher

[CAfast]

would youhappen to have a wiring harness??...

[NeedCAforS13]

no wiring harness. I do have an alternator, and I think I have a p/s pump pulley... let me check on that for you.

[c-rad]

You wouldn't happen to have the dipstick tube, would you? I got one from a FWD, but it doesn't seem to fit right.

[GoofyATX240]

Hey I sent you an email man about the valve covers.

[NeedCAforS13]

haha I know, I got sidetracked and forgot to reply! doing it now

[Torpor]

Why do you have to be in the US.. ?

Here is SA just that Turbo with busted seal will go for $428...

Can you ship some of that stuff to South Africa ?

and if so where do I sign?

[Not_a_sr]

you have any CAS laying around??

also i have a hicas pump i would be willing to trade for a regular pump if anyone has one.

tjon

[rexhunta]

I'm looking for a muffler bearing.. i think mine has gone ??

[NeedCAforS13]

you have any CAS laying around??

this new motor didn't have one in it, but I think I might have a spare one laying around the garage... I know I have one with a busted off front piece (the piece that slides into the cam) but I don't know if I have any good ones.

[gore]

I have the cas from this motor name a price and its yours