Part number help or information...

[frenetic]

Replacing injectors today on a 1990 Q45 and realizing I will likely need to replace most of the hoses that I have removed. Problem is, I don't know which is which, and there's quite a few of them. Is there a kit I buy, or do I have to get each hose individually? I am sure I could salvage most of them, the one's I have gotten off so far have not been cracked and are in good condition. But if I need to replace 2 or 3, I might as well do all of them. I know some of these are fuel hoses, some are coolant hoses, etc. But If I had to go to a parts store there's no way I could identify all of them. Any helpful information on this?

[maxnix]

Call

http://www.infinitipartsusa.com

with your VIN.

There are several posts, including one by Elwesso with a spreadsheet.

[Q451990]

Call IOS and have them look up my parts invoices from last fall if you want... That will include everything rubber under the plenum, and a handful of other parts - but in terms of hoses, that would be a complete list. Tell them to look under my name - Heath Roberts.

The one thing I remember that was wrong in their system is that the PCV hose that goes from the 90 degree metal turn and runs down the front side of the rocker cover on the left side was superceded in their system with the 94-96 style - but it's too short. So order it's twin on the right side (that has the protective peice that goes under the oil fill hole) and cut it to fit.

Good luck!

Heath