Post by
rcboy514 »
https://forums.nicoclub.com/rcboy514-u88574.html
Mon Aug 29, 2011 8:06 pm
I used about three 6oz-8oz cans from oreilly auto parts, the color I used was "GM Metallic Black". When you pop out the center cap the little nissan burger will pop off too, just squeeze the clips on the back of the center cap. Just sand with 1500 wet/dry paper and make sure the wheels are clean before applying a couple coats of adhesion promoter, then spray on the paint. For some reason this type of spray paint that is supposed to match factory colors doesn't cover well so you have to do at least 5 coats on the wheels because the paint comes out so thin, but the results are worth the time. After that I did 2-3 coats of clear sanded with 1500 grot paper again and then added one last coat of clear.
ill be sure to post pics ;-)